Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 147 / 282

147
Chapter 10 Track and Phrase Editing
Chapter 10
cursor to the track you want to time compress.
c. Press [F3 (MARK)].
d. If [F2 (All)] is pressed, all tracks are selected to be
cut.
e. Press [F1 (Back)].
fig.04-30
5.
[ ], [ ], [ ], and [ ] to move the cursor.
Set the START and END values.
A quick way to enter edit points (START, END, FROM, and
TO) is to create a locator for each edit point (p. 45) before
entering the edit screen. Then go to the desired edit screen
(such as Erase, Copy, Cut). You can enter your edit points by
pressing a LOCATOR button and then holding [SHIFT] and
pressing [LOC 1] to enter that point as the START time, [LOC
2] to enter that point as the END time, [LOC 3] to enter that
point as the FROM time, or [LOC 4] to enter that point as the
TO time.
fig.04-31
START (Start Point)
Specifies where the time compression or expansion will
start.
END (End Point)
Specifies where the time compression or expansion will
end.
Pitch Mode
Variable: The pitch of the audio will change
Fixed: The pitch will remain at the original level.
Type
This selects which algorithm is used to complete the
Time Compression/Expansion. The type will also affect
how long the process takes. Select the setting that
matches the type of song or material you are working
with.
A: Vocal, Narration
B:
Slow-tempo Songs
C: Fast-tempo Songs
To Point
This specifies the ending time location that will result
from the compression or expansion.
Amplitude
This specifies the volume level that will result from the
compression as a percentage of the original source (50,
60, 70, 80, 90, 100%). The default value of 60% is
recommended. If the volume level after conversion is too
low, use the Undo function to return to its original state,
increase the Amplitude setting, and try the operation
again. Excessively high Amplitude settings can
introduce distortion in the audio.
6.
Press [F4 (Exec)]. This executes the compression or
expansion.
* Be aware that depending on conditions, it may take some time
for compression or expansion to be completed. This is not a
malfunction. Progress of the operation is shown in the display.
Do not turn off the power until the compression or expansion
is completed! You can cancel compression or expansion by
pressing [NO].
7.
When Track Compression/Expansion is completed
correctly, “Complete” appears in the display.
8.
Press [PLAY (DISPLAY)] to return to the Playlist display.
If you are unhappy with the edit you made, press [UNDO].
“UNDO Level 1” will be displayed. Press [YES] to restore
your track(s) to their condition prior to the edit.
If you have used the metronome while recording, here is a
quick way to change the tempo of your song using Time