manualshive.com logo in svg

Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 142 / 282

Поделиться
Скачать
Roland VS-1680 V-XPANDED Скачать руководство пользователя страница 142

142

Chapter 10 Track and Phrase Editing

c.

Press [F3 (MARK)].

d.

If [F2 (All)] is pressed, all tracks are selected to be 
moved.

fig.04-09

e.

Use the TIME/VALUE dial to select the desired V-
Track for the destination track. The V-Track is 
indicated by the number to the right of the dash. For 
example, “1-1” indicates “Track 1, V-Track 1,” and 
“9L-1” indicates “Track 9, V-Track 1.”

* Do not designate V-Tracks that have already been specified as 

move destinations for other tracks.

f. Press [F1 (Back)].

5.

Press [

], [

], [

], and [

] to move the 

cursor. Set the START, END, FROM, and TO values.

A quick way to enter edit points (START, END, FROM, and 
TO) is to create a locator for each edit point (p. 45) before 
entering the edit screen. Then go to the desired edit screen 
(such as Erase, Copy, Cut). You can enter your edit points by 
pressing a LOCATOR button and then holding [SHIFT] and 
pressing [LOC 1] to enter that point as the START time, [LOC 
2] to enter that point as the END time, [LOC 3] to enter that 
point as the FROM time, or [LOC 4] to enter that point as the 
TO time.

fig.04-10

START (Start Point)

Specifies the start time of the segment to be moved.

END (End Point)

Specifies the end time of the segment to be moved.

FROM (From Point)

Specifies the reference position of the segment to be 
moved, in relation to the TO point. Normally, this is set 
as the same as the START point.

TO (To Point)

Specifies the time point the segment will be moved to. 
Specifies the destination point.

+Insert

When this is set to “On,” a blank space is inserted at the 
destination location (the To Point) that is equal in length 
to the section of audio being moved. Then the Track 
Move is carried out. This is useful for moving a section 
of audio within your song without altering any audio 
that is currently there.

fig.04-12

6.

Press [F4 (Exec)]. This executes the Track Move.

7.

When Track Move is completed correctly, “Complete” 
appears in the display.

8.

Press [PLAY (DISPLAY)] to return to the Playlist display.

A

Start

End

To

T

A'

Содержание VS-1680 V-XPANDED



























































































































































































































































































Отзывы:

Нет отзывов