Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 110 / 282

110
Chapter 8 EZ Routing
Setting Up for Recording Using Step Editing
Select this when you want to make a new recording from a source connected to one of the INPUT jacks. If you wish to cancel the
settings procedure, press [F6 (EXIT)].
1.
Press [EZ ROUTING]. The EZ Routing icon appears in the display.
2.
Press [F4 (Exec)]. If “Exec” does not appear in the display above [F4], press [PAGE] until you see “Exec,” and then press [F4
(Exec)].
fig.02-18
3.
Press [F1 (Rec)].
4.
Specify which input source is to be recorded to each track. To do this, first press the Input SELECT for the input you want to
use, then press the Track STATUS button for the track you want to record on. Using this method, you can assign a single Input
to two different tracks for recording. Use [ ] and [ ] to move the cursor and the TIME/VALUE dial to select the V-
Track on which you want to record.
* You cannot assign a DIGITAL input to more than one stereo-linked pair of tracks.
* Using EZ Routing, it is not possible to assign a stereo-linked input to tracks that are not linked. For example, to record the DIGITAL
input on Tracks 3 and 4, you must first turn Stereo Link on for Track 3.
fig.02-19
5.
Press [F2 (STEP ->)].
Source assigned to the MIX bus
Source assigned to the track
Source
Track
V-Track