Roland VS-1680 V-XPANDED, Руководство пользователя, Страница: 103 / 282

103
Chapter 7 Using Internal Effects (VS8F-2)
Chapter 7
Next, Set Up the Mixer
1.
Press the SELECT button for Input 2. The button
indicator lights, and the Input Mixer Screen appears in
the display.
2.
Use [ ], [ ], [ ], and [ ] to move the
cursor to “EFXIns.” Or, press [F3 (Ef3In)]. If “Ef3In” does
not appear above [F3], press [PAGE] a few times until
you see “Ef3In”, and then press [F3 (Ef3In)]. This will
move the cursor directly to “EFXIns.”
3.
Press [YES].
4.
Use [ ] and [ ] to move the cursor to EFX3. Use
the TIME/VALUE dial to change the Effect Insert Switch
to “Ins.”
5.
Press [PLAY (DISPLAY)] to return to the Playlist display.
Example 3: Place a Limiter on the
Stereo Mix Master Output
General Strategy: Insert the effect on the MIX bus.
Details for this Example: Select Patch P067 as EFX2, insert
on Master Block.
Begin by Selecting the Effect
1.
Press [PLAY (DISPLAY)].
2.
Hold [SHIFT] and press [F3 (EFFECT A)].
3.
Press [F4 (EFX2)]. The Effect 2 screen appears in the
display. If “EFX2” does not appear above [F4], press [F6
(EXIT)] until it does. Then, press [F4 (EFX2)].
4.
Press [F2 (Sel)]. The effects list appears in the display.
5.
Use the TIME/VALUE dial or [ ], [ ], [ ],
and [ ] to move the cursor to Effect Preset Patch P067
“Limiter.”
6.
Press [F4 (Exec)] or press [YES] to select the effect. The
EFFECT 2 screen appears in the display.
Next, Set Up the Mixer
1.
Press [EDIT/SOLO]. The button indicator lights, and the
Master screen appears in the display.
2.
Use [ ], [ ], [ ], and [ ] to move the
cursor to “EFXIns.” Or, press [F2 (Ef2In)]. If “Ef2In” does
not appear above [F2], press [PAGE] a few times until
you see “Ef2In”, and then press [F2 (Ef2In)]. This will
move the cursor directly to “EFXIns.”
3.
Press [YES].
4.
Use [ ], and [ ] to move the cursor to EFX2. Use
the TIME/VALUE dial to change the Effect Insert Switch
to “Ins.”
5.
Press [PLAY (DISPLAY)] to return to the Playlist display.
Connecting Effect Send-and-
Return Loops
1.
Select the channel to which the effect is to be added.
Press the SELECT button for either an input channel or a
track channel. The button indicator lights, and the Mixer
Screen appears in the display.
2.
Use [ ], [ ], [ ], and [ ] to move the
cursor to “EFX1,” or press [F1 (EFX1)]. If “EFX1” does
not appear above [F1], press [PAGE] a few times until
you see “EFX1”, and then press [F1 (EFX1)].
fig.05-08
3.
Use [ ] and [ ] to move the cursor. Use the
TIME/VALUE dial to change the values.
Sw (Effect Send Switch)
This selects how the signal is sent to the EFFECT bus.
Off:
Signal is not sent to the EFFECT bus.
Pre:
(Pre-fader). The signal is sent based on its level before
the mixer fader.
Pst:
(Post-fader). The signal is sent based on its level after
the mixer fader.
Send Level
This adjusts the volume level of the signal (0-127) sent to
the EFFECT bus. The default setting is 100.
Send Pan
This adjusts the stereo placement of the signal (L63-R63)
sent to the EFFECT bus. “L63” is hard left and R63 is
hard right. The default value is “0” (center). This is
useful for isolating channels to the left or right side of a
stereo effect so they can be processed independently.
4.
Press [PLAY (DISPLAY)] to return to the Playlist display.
5.
Connect EFX2-EFX4 using the same method.
Effect Send Switch
Effect Send Level
Effect Send Pan