80
Advanced Use
Switching the polarity of the control pedal
❍
CONTROL PEDAL 1 POLARITY
(STANDARD /REVERSE)
❍
CONTROL PEDAL 2 POLARITY
(STANDARD /REVERSE)
Depending on the type of pedal switch, the result when
the switch is operated may be the opposite of what you
intend. If the pedal switch does not operate as described
in this owner’s manual, change the polarity setting.
Turning the [VIBRATO AND CHORUS] knob toward the
right will select STANDARD, and all of the D BEAM
TYPE indicators will light.
Turning it toward the left will select REVERSE, and all of
the D BEAM TYPE indicators will go out.
Switching the polarity of the Hold pedal
❍
HOLD PEDAL POLARITY
(STANDARD/REVERSE)
Depending on the type of pedal switch, the result when
the switch is pressed may be the opposite of what you
intend. If the pedal switch does not operate as described
in this owner’s manual, change the polarity setting.
Turning the [VIBRATO AND CHORUS] knob toward the
right will select STANDARD, and all of the D BEAM
TYPE indicators will light.
Turning it toward the left will select REVERSE, and all of
the D BEAM TYPE indicators will go out.
❍
HOLD PEDAL ASSIGN
(ORGAN & ORCHESTRAL TONES/
ORCHESTRAL TONES)
If a Hold pedal is connected, you can sustain the sound by
pressing the pedal. This selects the part that will be
sustained when you press the Hold pedal.
Turn the [VIBRATO AND CHORUS] knob toward the left
to select ORGAN & ORCHESTRAL TONES, or toward the
right to select ORCHESTRAL TONES.
❍
LIGHT MODE (NORMAL/MULTI)
This changes how the [D BEAM] button lights.
Turn the [VIBRATO AND CHORUS] knob toward the left
to select NORMAL, or toward the right to select MULTI.
❍
AUTO COLOR MODE (OFF, 1–10)
You can set the instrument so the color of the [D BEAM]
button begins changing automatically after a
predetermined period elapses, throughout which no
buttons or knobs have been operated, even though the [D
BEAM] button has been on.
Settings Values: OFF, 1 (20 seconds), 2–10 (1 minute–
9 minutes)
❍
ORGAN BEND RANGE (OFF, 1–12)
When [ORGAN CONTROL] is off, this parameter allows
the bender to be used to apply pitch bending to the entire
organ voice.
Increasing this value by one will allow an additional
semitone of pitch change when the bender is moved to left
or right. With a setting of 12, a pitch change of one octave
will result when the bender is moved to left or right.
❍
AFTERTOUCH SENS (Aftertouch Sensitivity)
(0–15)
This adjust the depth of the Aftertouch.
Setting
Explanation
STANDARD
Use this setting if the pedal switch
operates as described in this owner’s
manual.
REVERSE
Use this setting if the pedal switch pedal
operates the opposite of the description in
this owner’s manual.
Setting
Explanation
STANDARD
Use this setting if the pedal switch
operates as described in this owner’s
manual.
REVERSE
Use this setting if the pedal switch
operates the opposite of the description in
this owner’s manual.
Setting
Explanation
NORMAL
The [D BEAM] button lights the same
way, regardless of the D Beam type.
The color changes each time your hand
is placed over the D-Beam.
MULTI
The manner in which the [D BEAM]
button lights changes according to the
D Beam type.
Depending on the D Beam type, the
color may change continuously, or the
color may switch each time your hand
is placed over the D-Beam.
VK-88_e.book 80 ページ ２００４年４月２０日 火曜日 午前９時０分
