manualshive.com logo in svg

Roland VersaUV LEF-20, Руководство пользователя

Поделиться
Скачать
Roland VersaUV LEF-20 Скачать руководство пользователя страница 30

28

Chapter 2  Maintenance

Instructions for Maintenance

Switch the power on once every two weeks

Switch the sub power on once every two weeks . When you turn on the power, the machine performs 
operations to keep the print heads from drying out . Leaving the machine unused for a prolonged period 
may damage the print heads, so be sure to switch on the power to perform these automatic operations .

Keep the machine at a constant temperature and relative humidity

Even when the machine is not in use, keep it at a temperature of 5 to 40°C (41 to 104°F) and a relative 
humidity of 20 to 80%RH (with no condensation) . Not doing so may cause the machine to break down .

Automatic Maintenance Function and Notes

This machine has a function that automatically performs maintenance periodically . This function performs 
operations for preventing the print heads from drying out, so:
•  Always keep the main power switched on .
•  Do not leave the front cover open for a long time .
•  Return to the top menu after specifying settings in the menus .

Alarm Function

This function reminds you to switch on the sub power once a month . When the machine remains unused for 
about a month, this screen appears and a warning buzzer sounds . If this screen appears, switch on the sub 
power . When maintenance operations finish, switch off the sub power .
This function operates when the printer's main power is turned on . Leave the main power switched on at all 
times even when the printer is to remain out of use for a prolonged period .

PRESS THE POWER
KEY TO CLEAN

Maintenance That Should Be Performed Daily

Ink Cartridge Maintenance

The components in the ink have a tendency to precipitate . The deposits may harden and cause problems 
including printer malfunctions if left alone for an extended period of time, and this is especially true for the 
white ink .
•  Shake new ink cartridges 50 times (about 15 seconds) before installing them .

 

"

"2 . Insert the Ink Cartridges for the Respective Colors" (First Step Guide)

•  Every day before starting work, remove the white ink cartridges, shake them 50 times (about 15 seconds), 

and then reinsert them .

 

"

"STEP 3: Printing Tests and Normal Cleaning" (First Step Guide)

About Maintenance

Содержание VersaUV LEF-20













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды