Roland VersaStudio BT-12, Руководство по эксплуатации

Страница: 214 / 234

212
9. Troubleshooting
Cartridge Almost Empty
One of the ink cartridges is almost empty.
Check which color ink cartridge will soon have to be replaced, and then have a new cartridge
handy.
• If you print an image that needs a lot of ink, the machine may stop printing before the print is
finished. An example of such an image is one containing a single large area of solid color, or
one made up almost entirely of a few such areas.
• Do not carry out head cleaning or head flushing. If you do, the ink may run out.
• If you turn the machine off, and then turn it on again, the machine will send the ink in the ink
cartridge to the machine. During this, the ink in the ink cartridge may run out.
• The amount of remaining ink shown in the cartridge replacement indicator is for reference
only and may differ from the actual amount. Also, cartridges can become empty without a
low ink warning appearing.
Cartridge Empty
The ink has run out.
Replace the cartridge.
See page 161 "
Replacing an Ink Cartridge ".
• If the cartridge is empty, head cleaning or flushing cannot be performed.
• If the ink runs out during printing, the machine may eject the tray while printing is performed
or leave nothing printed.
Used Cartridge
A used ink cartridge was installed.
Replace the ink cartridge.
See page 161 "
Replacing an Ink Cartridge ".
• If the cartridge is empty, head cleaning or flushing cannot be performed.
• Cartridges that are no longer usable for printing reserve a small quantity of ink for
maintenance usage. Make sure you do not install an empty ink cartridge by mistake.
• Ink cartridges should be used up before their expiry date, preferably within three months
after its package is opened.