manualshive.com logo in svg

Roland VersaStudio BR-20, Руководство пользователя

Поделиться
Скачать
Roland VersaStudio BR-20 Скачать руководство пользователя страница 47

Using Metallic Silver Ink

45

Chapter 2  Fully Utilizing the Machine

Chapter 2  Fully Utilizing the Machine

Specify the RGB value set for the part to be printed using a metallic color in step 

1.

-

.

If the color for the part you do not want to print using the metallic color set in step 

1.

-

 Overlaps, 

redo the settings from step 

1.

-

.

Blend Print and Layered Print

Blended printing and layered printing are printing methods that allow you to combine metallic silver ink and 
CMYK ink. Metallic ink expressions that cannot be created can be realized with just CMYK inks. The printing 
method differs for blended printing and layered printing, and the metallic impression rendered by CMYK is 
different. You can make blended printing and layered printing selections by selecting [Ink Mode] in R-Works 
or the BN-20 driver. Select the best type to suit your situation.

 P.45, "Blend Print (Metallic CMYK),"

 

p.50, "Layered Print (Metallic Silver 

 CMYK)," p.55,"Layered Print 

(CMYK 

 Metallic Silver)"

Blend Print (Metallic CMYK)

This section describes how to perform the blend print with the metallic silver ink and CMYK ink.

 P.45, “Blend Print and Layered Print” 

To perform the blend print, you need to use the printing data where the use of the metallic silver ink and the 
CMYK ink is designated.

 P.41, "Creation of Print Data Using Metallic Color (R-Works)," p.43 "Creation of Print Data Using Metallic Color 

(General Application for Drawing)"

(Image of printing method)

In blended printing and layered printing, you can specify a metallic color with the same name or 
metallic silver ink with the same density. However, because the printing method for blended printing 
and layered printing is different, coloring is also different. We recommend that you perform a test 
print to check the coloring.

The metallic silver ink and the CMYK ink are blended to be a single layer for printing.

Media

Metallic Silver and CMYKCMYK

Содержание VersaStudio BR-20

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды