Roland VersaCAMM ECO-SOL MAX3 Скачать руководство пользователя страница 19

Important: Changes and Precautions after Switching the Ink

19

ECO-SOL MAX 3 Ink Switching Method

When Not in Use for a Prolonged Period, Precaution 1

In advance, insert ink cartridges that have a large amount of ink remaining.

If the ink runs out, the machine will not be able to periodically perform automatic maintenance. If the machine is left in this 
state, the print heads may malfunction. If you know that you will not use the machine for a prolonged period, insert ink 
cartridges that have a large amount of ink remaining.

When Not in Use for a Prolonged Period, Precaution 2

Discard the discharged fluid in advance of prolonged periods of disuse.

If you know that you will not use the machine for a prolonged period, follow the procedure below to discard the discharged 
fluid.

Procedure

Press 

.

Press 

 several times to display the screen shown on the left.

Press 

, then 

.

Press 

, then 

.

Press 

.

When the screen on the left is displayed, remove the drain bottle and 

discard the discharged fluid.

CAUTION 

Before you detach the drain bottle, be sure to wait for the screen to display "EMPTY 

DRAIN BOTTLE."

Failing to do so may cause discharged fluid to flow out of the machine and spill onto your 
hands or the floor and cause a stain.

Attach the emptied drain bottle to the machine once more.

Press 

.

Press 

.

Press 

 to go back to the original screen.

WARNING 

Never place discharged fluid or ink near an open flame.

Doing so may cause a fire.

CAUTION 

To store discharged fluid temporarily, place it in the included drain bottle or in a du

-

rable sealed container such as a metal can or polyethylene tank, and cap the container 

tightly.

Any spillage or vapor leakage may cause a fire, an odor, or physical distress.

Dispose of discharged fluid properly, in accordance with the laws in effect in your locale.

Discharged fluid is flammable and contains toxic ingredients. Never attempt to incinerate discharged fluid or discard it with 
ordinary trash. Also, do not dispose of it in sewer systems, rivers, or streams. Doing so may have an adverse impact on the 
environment.

/'07
57$/'07

57$/'07
/#+06'0#0%'

/#+06'0#0%'
&4#+0$166.'

'/26;
&4#+0$166.'

'/26;
&4#+0$166.'

4'5'6&4#+0
%1706'4

/#+06'0#0%'
&4#+0$166.'

Содержание VersaCAMM ECO-SOL MAX3






















Отзывы: