Roland VersaCAMM ECO-SOL MAX3, Инструкция по эксплуатации

Страница: 15 / 21

Switching the Ink
15
ECO-SOL MAX 3 Ink Switching Method

Click [Apply].
The printer that has been switched to MAX 3 ink is
displayed under [Printer List].

If there are multiple printers that have been switched to MAX 3 ink, click .
Repeat steps

,

,

, and

to reconnect to these printers that have been switched to MAX 3 ink.

Click [OK].
This completes the operations to switch to MAX 3 ink.
When a printer that does not use MAX 3 ink is connected to VersaWorks
2.
Temporarily delete the printer that has been switched to MAX 3 ink from VersaWorks.

Start VersaWorks.

When the screen shown in the figure is
displayed, click [OK].
The [Printer Settings] screen will appear.

Select a printer that has been switched to
MAX 3 ink under [Printer List], and then
click .

When the screen shown in the figure ap -
pears, confirm that you want to delete the
selected printer, and then click [Yes].
The selected printer disappears from the [Printer
List].