Roland VC-1HD, Руководство пользователя

Страница: 14 / 44

14
Video Input/Output Settings
Setting the Video Input/Output
Format
You set the input/output format to match the
incoming video signal.
* Before setting the input/output format, first be sure to
turn off the power to the V-1HD.
1.
Slide the [FORMAT] switch on the rear panel to
set the input/output format.
[FORMAT] switch Inputtable formats Output format
1080p 1080p, 1080i 1080p
1080i 1080p, 1080i 1080i
720p 720p 720p
MEMO
5
The V-1HD’s internal processing is progressive. Interlaced
input video is automatically converted to a progressive
signal.
The picture might appear jagged at this time, or the
picture in a PinP inset screen or preview four-way
split screen might waver. This is due to progressive
conversion, and is not a malfunction.
5
The methods for converting an interlaced signal to a
progressive signal are of two types: “BOB” and “WEAVE.”
BOB
This interpolates the top field and bottom
field, and unites them in a single frame.
This is optimal for video that contains much
movement.
WEAVE
This joins the top field and bottom field in
a single frame. This is optimal for video that
contains little movement.
To set the conversion method, press and hold the [(TAP)
BPM] button g use “DEINTERLACE MODE” at the SETUP
menu.
About Frame Rates
Frame rates that can be input are “59.94” and “50.”
Inputting video at a frame rate other than these
might result in no output or dropped frames.
To change the frame rate, press and hold the [(TAP)
BPM] button g select “FRAME RATE” at the SETUP
menu g select “59.94” or “50” g press the [ ] button.
Adjusting Output Video
You can adjust the main output video or preview
output video to match the equipment receiving
output from the V-1HD.
MEMO
5
You can output a color bar, useful for adjusting the
image quality of a display. Press and hold the [(TAP) BPM]
button
g
set “COLOR BAR OUTPUT” at the SETUP menu
to “ON.”
1.
Press and hold the [(TAP) BPM] button (for 2
seconds or longer) to display the SETUP menu.
2.
Use the [ ] and [ ] buttons to select an item.
You use the following items to adjust the main
output video.
Menu item Explanation
OUTPUT CONTRAST This adjusts the contrast.
OUTPUT SATURATION This adjusts the saturation.
OUTPUT BRIGHTNESS This adjusts the brightness.
OUTPUT COLOR SPACE This sets the color space.
OUTPUT DVI-D/HDMI This sets the output mode.
You use the following items to adjust the preview
output video.
Menu item Explanation
PREVIEW CONTRAST This adjusts the contrast.
PREVIEW SATURATION This adjusts the saturation.
PREVIEW BRIGHTNESS This adjusts the brightness.
PREVIEW COLOR SPACE This sets the color space.
PREVIEW DVI-D/HDMI This sets the output mode.
3.
Use the A/B fader to adjust the main output
video or preview output video.
* The settings for the following menu items are applied by
pressing the [ ] button. If 10 seconds elapse without
applying the setting, the setting returns to its original
value, with no change applied.
5
OUTPUT COLOR SPACE
5
OUTPUT DVI-D/HDMI
5
PREVIEW COLOR SPACE
5
PREVIEW DVI-D/HDMI
4.
Press the [(TAP) BPM] button to quit the menu.