manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 334

 

26—Automix

 

334

www.rolandus.com

Roland VS-2480 Owner’s Manual

 

Automix Editing Operations

 

Since all Automix edit operations affect regions of Automix data, they all use the IN 
and OUT edit points. We’ll note how FROM and TO are used where applicable.

 

About Moving and Deleting Automix Data

 

When you move or delete Automix data, the location from which you move or delete 
the data no longer contains its changes. What this means is that the value set by the 
final Automix event before the now-missing data stays in effect until the timeline 
reaches the next event, after the missing data’s original location.

 

COPY

 

You can copy Automix data from one part of a project to another, or from one Automix 
track to another. This allows you to re-use any chunk of automation at multiple 
locations in a project. This can be especially handy when the same section of audio—
such as a chorus—appears more than once. When you perfect the automation for the 
section, you can re-use it each time it occurs in the project.

 

MOVE

 

Automix MOVE allows you to move already-recorded Automix data to a new location 
on the same Automix track or to another Automix track. You’d most often use MOVE 
when you’ve changed the position of track audio and need to move its automation to 
the same location.

 

Edit point:

What it does:

 

FROM

sets the location of the Automix data region’s time anchor

TO

sets the destination location for the time anchor

When you copy Automix data to a new location, it replaces any Automix data already 
present in the destination location.

-4.0dB

Data gone

-6.0dB

1.0dB

-1.0dB

-4.0dB

Data being moved

-6.0dB

1.0dB

-1.0dB

This illustration shows how a Level parameter’s values might change when Automix 

data is moved—the dotted line shows the resulting signal level.

Before

After

OUT

TO

IN

OUT

TO

IN

FROM is set to 
the same 
location as IN.

VS2480OMUS.book 334 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды