manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 321

 

25—Surround

 

Roland VS-2480 Owner’s Manual

www.rolandus.com

321

 

Turning on Surround Mode

 

To create a Surround mix, you must be in Surround mode.

1.

Press UTILITY.

2.

If “Surrnd” isn’t visible above F3, press PAGE until it is.

3.

Press F3 (Surrnd) to view the SURROUND screen.

4.

Set SURROUND MIX MODE to the desired Surround format.

5.

Turn the SURROUND MIX Sw parameter on. The VS-2480 reminds you that it’s 
about to re-configure your Aux busses, and asks if you’re sure you want to switch to 
Surround mode.

6.

Press ENTER/YES to proceed, or EXIT/NO to cancel the activation of Surround 
mode.

If you pressed ENTER/YES in Step 6, the VS-2480 reminds you that your current 
channel panning settings will also be affected by the switch to Surround mode.

7.

Press ENTER/YES to proceed, or EXIT/NO to cancel the change into Surround 
mode.

When you switch to Surround mode, connections are broken between any Aux busses 
required by the selected Surround format and the VS-2480’s internal effects in order to 
prevent confusion. You can re-route the Aux busses to the effects if you wish (Page 294).

This message also appears if you change Surround formats when Surround mode is 
already turned on.

If you’ve got mixer settings you’d like to preserve, press EXIT/NO, save them as a scene 
and then activate Surround mode.

VS2480OMUS.book 321 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды