manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 287

 

Roland VS-2480 Owner’s Manual

www.rolandus.com

287

 

22—Working with the VS-2480 Outputs

 

The VS-2480 offers a wide range of analog output jacks and digital connectors from 
which you can send its audio signals to external devices. This chapter discusses how to 
route signals to them and how they can be used.

 

The VS-2480 Outputs

 

Output Pairs

 

The VS-2480’s analog and digital outputs are managed as left/right or odd/even output 
pairs when you’re routing signals to them. These pairs are fixed, and can’t be altered.

 

Analog Output Jacks

 

The VS-2480 has eight 1/4” analog output jacks that you can connect to external devices 
when you want to send audio signals out of the VS-2480. You can use the jacks for the 
jobs suggested by their names or for any other purpose in which you need to get a
VS-2480 audio signal to an external device that has analog inputs.

When you’re routing busses to them, the eight 1/4“mono analog output jacks are 
divided into the following four sets of stereo jacks:

•

MASTER L/R

•

AUX A L/R

•

AUX B L/R

•

MONITOR L/R

When you’re routing track signals directly to the analog jacks—perhaps to send them 
to tracks on an external multitrack recorder with analog inputs—they’re divided into 
the following four pairs of output jacks:

•

ANALOG MULTI 1 and 2

•

ANALOG MULTI 3 and 4

•

ANALOG MULTI 5 and 6

•

ANALOG MULTI 7 and 8

You can also route any pair of busses to the two stereo 1/4” PHONES jacks.

 

Digital Output Connectors

 

The VS-2480 provides both S/P DIF-format and R-BUS digital output connectors.

 

S/P DIF Stereo Output Connectors

 

The VS-2480 has one coaxial and one optical stereo S/P DIF output connector (Page 49).

If you’ve connected a VS-2480 S/P DIF output to a device that’s using a lower bit rate, 
you can dither the VS-2480’s output down to the desired bit depth—see Page 366.

You can activate digital copy-protection to prevent the making of digital copies of audio 
you’ve recorded on a connected external DAT or MiniDisc recorder—see Page 366.

For a detailed discussion of master clock considerations when sending digital audio 
from device to device, see Page 132.

VS2480OMUS.book 287 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды