manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 284

 

21—Using the Phrase Pads

 

284

www.rolandus.com

Roland VS-2480 Owner’s Manual

 

Using Tie, Rest and BackStep

 

On the second PHRASE SEQUENCE screen, the Tie and Backstep features use the 
position of the timeline to change the duration of the closest phrase on the selected 
track within a specified time window to the left of the timeline. Rest moves the timeline 
by the selected amount.

•

 

F3 (TIE)

 

—the timeline moves forward in time by the specified amount, increasing 

the duration of the closest phrase within the time window so that it reaches the 
timeline’s new position.

•

 

F4 (REST)

 

—the VS-2480 moves the timeline ahead by the specified length.

•

 

F5 (BckStp)

 

—the timeline moves back in time by the specified amount, shortening 

the duration of the closest phrase within the time window so that it extends no 
further than the timeline’s new position.

The arrow to the left of 
the playlist selects the 
sequence track whose 
phrase is affected by Tie 
or BackStep. To select a 
different track, press 

 

or 

.

If the selected track is 
linked, Tie and BackStep 
affects both tracks.

Before Tie

After Tie

With F2 (Beat), Tie stretches the phrase to the next beat.

Before Rest

After Rest

With F2 (Beat), Rest moves the timeline to the next beat.

Before BackStep

After BackStep

With F2 (Beat), BackStep shrinks the phrase to the previous beat.

VS2480OMUS.book 284 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды