manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 249

 

18—Editing Tracks

 

Roland VS-2480 Owner’s Manual

www.rolandus.com

249

 

Editing from the TRACK Menu

 

 You can perform any phrase or region editing operation from the TRACK menu.

 

How the TRACK Menu Is Organized

 

The TRACK menu presents all phrase and region editing operations in two sub-menus:

•

The TRACK PHRASE EDIT MENU

•

The TRACK REGION EDIT MENU

The large PHRASE and REGION symbols that appear at the right side of the screen tell 
you at a glance which menu is currently displayed.

 

The Appearance of TRACK Menu Screens

 

TRACK menu screens, as shown on the previous page, don’t fill the entire display—
parts of the Home screen remain visible to make editing easier. You can move around a 
project using the current time location display (Page 126). The playlist is visible in most 
edit screens. The meters display—or the fader/pan displays—may also remain in view.

 

Sources and Destinations in the TRACK Menu

 

When you’re moving or copying phrases and regions, or if you’re swapping regions on 
different tracks in the TRACK menu, designate the:

•

 

source track

 

—the track you’re moving or copying audio from.

•

 

destination V-Track

 

—the track to which you’re moving or copying the audio.

The parameters unique to each phrase or region editing operation are described in 
Chapters 19 and 20, respectively.

 

If you’re viewing:

Switch to the:

By pressing:

TRACK PHRASE EDIT MENU

TRACK REGION EDIT MENU

 

F6 (Ph

 

→

 

Reg)

 

TRACK REGION EDIT MENU

TRACK PHRASE EDIT MENU

 

F6 (Reg

 

→

 

Ph)

You can also select the desired menu by pressing PHRASE•REGION•AUTOMIX until 
it turns the desired green or red.

When the playlist is visible during editing, you can press WAVE DISPLAY to replace 
the playlist with the wave display.

MENU

PROJECT

TRACK

EFFECT

UTILITY

VS2480OMUS.book 249 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды