manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 193

 

13—Operating the Hard Disk Recorder

 

Roland VS-2480 Owner’s Manual

www.rolandus.com

193

 

Setting Auto Punch Points While a Project Is Playing

 

1.

Start playback shortly before the location at which you want the punch to begin.

2.

Hold down A.PUNCH.

3.

Without releasing A.PUNCH, press TAP at the desired punch-in point.

4.

Continue holding A.PUNCH and press TAP at the desired punch-out location.

5.

Release A.PUNCH.

 

Setting Auto Punch Points Using Locators

 

You can learn about locators on Page 185. The following steps presume you’ve already 
placed locators at the desired punch-in and -out locations.

1.

Press LOCATOR—so it’s lit—and select the locator bank containing the locators 
you want to use as punch-in and punch-out points.

2.

Press the locator positioned at the start of the section you want to punch.

3.

Hold down A.PUNCH and press IN.

4.

Press the locator positioned at the end of the section you want to punch.

5.

Hold down A.PUNCH and press OUT.

 

Setting Auto Punch Points Using Markers

 

Markers are described on Page 188. Before setting your Auto Punch In and OUT points, 
place markers at the desired punch-in and -out locations.

1.

Move to the marker located at the desired punch-in location.

2.

Hold down A.PUNCH and press IN.

3.

Move to the marker positioned at the end of the section you want to punch.

4.

Hold down A.PUNCH and press OUT.

 

Editing Auto Punch IN and OUT Points Manually

 

You can edit, clear and place Auto Punch IN and OUT points on the AUTO PUNCH/
LOOP screen in the UTILITY MENU.

1.

Hold down SHIFT and press A.PUNCH—the AUTO PUNCH/LOOP screen 
appears.

You can do a few things with your Auto Punch IN and OUT points on this screen:
•

You can use the cursor buttons and TIME/VALUE dial, or your mouse, to 
change either point’s location by time code or measures and beats.

•

You can select IN or OUT on the screen and press F2 (CLEAR) to erase its 
current time assignment.

•

You can grab the timeline’s current position as a new IN or OUT point. Select 
IN or OUT on the screen and click F3 (GetNow).

•

You can move the timeline to an IN or OUT location by selecting IN or OUT on 
the screen and clicking F4 (GO TO).

2.

Press EXIT when you’re done to confirm your changes.

Auto Punch IN time
Auto Punch OUT time

VS2480OMUS.book 193 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды