manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 114

 

7—Project and Drive Operations

 

114

www.rolandus.com

Roland VS-2480 Owner’s Manual

 

Formatting a Hard Drive

 

1.

Press PROJECT.

2.

Select a drive belonging to the hard drive you want to format.

3.

If “FmtDrv” isn’t visible above F2, press PAGE until it is.

4.

Press F2 (FmtDrv)—the FORMAT DRIVE screen appears.

5.

Select the desired partition size. We recommend 10GB.

6.

Set Physical Format to:
•

 

Off (Quick)

 

—for faster formatting if you’re re-formatting a VS-2480 hard drive.

•

 

 

On

 

—if the hard drive is being formatted for the VS-2480 for the first time. If you 

have time—Physical Format extends the formatting process considerably—use 
Physical Format to absolutely eliminate any lingering data corruption.

7.

Set Surface Scan to:
•

 

Off

 

—to skip a check of the hard drive platter’s surface during formatting.

•

 

On

 

—so that it checks the surface of the hard drive’s platter by performing an 

automatic read/write test after formatting. This can take a while, but it’s a good 
thing to do periodically.

8.

Press F5 (OK). The VS-2480 asks if you’re sure you want to format the hard drive:

9.

Press ENTER/YES to proceed with the formatting, or EXIT/NO to cancel.
If you pressed ENTER/YES, the VS-2480 double-checks to make sure you want to 
proceed, since you’re about to erase everything that’s on the selected hard drive.

Back up all data on the hard drive before formatting. Formatting erases all of the data 
on the hard drive, and the data cannot be recovered using Undo or any other method.

If you accidentally delete data, that data cannot be restored to its previous state. Roland 
Corporation assumes no liability concerning such loss of data.

The Format Drive operation is available only when a drive is selected.

When you select a drive for formatting, you’re really selecting its entire hard drive, all 
of whose partitions are erased during formatting.

Unless you have a specific reason to question its underlying data, don’t turn on 
Physical Format when formatting a Zip disk.

PROJECT menu 

F2 (FmtDrv)

Information

about the

drive you’ve

selected.

Selected drive

VS2480OMUS.book 114 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды