manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 110

 

7—Project and Drive Operations

 

110

www.rolandus.com

Roland VS-2480 Owner’s Manual

 

Exporting to a VS-890 or VSR-880

 

•

Eight project tracks are exported. You can select Tracks 1-8, 9-16 or 17-24.

•

V-Tracks 1-8 are exported to Bank A, and V-Tracks 9-16 to Bank B.

•

Projects that use the M24 and LV2 recording modes can’t be exported as VS-890 or 
VSR-880 songs.

•

MTP-recorded project data is converted to VSR mode during export—this process 
can take a while.

 

Exporting to a VS-1680

 

•

16 project tracks are exported. You can select Tracks 1-16 or 9-24.

•

Only the project’s Locators 00-63 are exported.

•

Projects that use the M24 and CDR recording modes can’t be exported as VS-1680 
songs, nor can projects that contain CDR mastering tracks—see Page 340.

 

Exporting to a VS-1880

 

•

18 project tracks are exported. You can select Tracks 1-18 or 7-24.

•

Only the project’s Locators 00-63 are exported.

•

Projects that use the M24 recording mode can’t be exported as VS-1880 songs.

 

Exporting a VS-2480 Project

 

1.

Connect the Zip drive or CD-R/RW drive that you intend to use for 
the EXPORT procedure.

2.

Load the desired project into the VS-2480.

3.

Press PROJECT.

4.

Turn the TIME/VALUE dial to select the drive to which you want to export the 
project.

5.

If “EXPORT” isn’t visible above F4, press PAGE until it is.

6.

Press F4 (EXPORT). The PROJECT EXPORT screen appears, showing parameters 
appropriate to the device you’ve selected as the destination for your exported data.

7.

If you’ve selected a Zip drive, set Mode to determine the type of exported data you 
wish to create. You can select:
•

 

Archive

 

—if the project won’t fit on a single Zip disk, or if you simply prefer to 

export it as a song archive.

•

 

Playable

 

—if the project will fit on a single Zip disk.

In order to export a project as a playable song to a Zip disk, the Zip 
disk must first be formatted by the VS-2480—see “Format Drive” 
on Page 113. 

PROJECT menu 

F4 (EXPORT)

You selected a Zip drive in Step 4.

You selected a CD-R/RW drive in Step 4.

VS2480OMUS.book 110 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды