manualshive.com logo in svg

Roland V-studio VS-2480, Руководство пользователя

Поделиться
Скачать
Roland V-studio VS-2480 Скачать руководство пользователя страница 102

 

7—Project and Drive Operations

 

102

www.rolandus.com

Roland VS-2480 Owner’s Manual

 

6.

Press F1 (COPY)—the PROJECT COPY screen appears.

You can wipe the destination drive clean before copying your data to it.

7.

Set Erase all Projects to:
•

 

Off

 

—if you want to add what you’re copying to the list of projects already on the 

destination drive.

•

 

On

 

—if you want to clear the drive so it contains only what you’re copying.

8.

Press F5 (OK)—the VS-2480 asks:

9.

Press ENTER/YES to proceed, or EXIT/NO to cancel the COPY operation.
If you pressed ENTER/YES, the VS-2480 asks if you want to store any changes 
you’ve made to the currently loaded project before beginning the COPY process.

10. Press ENTER/YES to save your most recent changes to the currently loaded project 

before copying the marked project(s), or EXIT/NO to simply begin copying.

11. If Erase all Projects is on, the VS-2480 asks if you’re sure you want to erase the 

destination drive first—press ENTER/YES to do so, or EXIT/NO to cancel copying.

 

ERASE

 

You might want to erase a project from your hard drive to gain back free drive space, 
when you’ve copied it to another drive, or when you simply no longer want to project.

 

Erasing a Project

 

1.

Press PROJECT.

2.

Select and mark the project—or projects—you want to erase.

3.

If “ERASE” isn’t visible above F2, press PAGE until it is.

4.

Press F2 (ERASE)—the VS-2480 asks:

The project ERASE command permanently erases a project from your hard drive. This 
operation cannot be reversed using the VS-2480’s Undo feature, so perform it with care.

List of projects

you’ve marked

Currently

selected

drive info

Drive to which 
data will be 
copied

Press F2 to scroll down 
through the list of projects 
if it extends out of view, or 
F1 to scroll up the list.

PROJECT menu 

F2 (ERASE)

VS2480OMUS.book 102 ページ ２００６年２月７日　火曜日　午後４時１６分

Содержание V-studio VS-2480





































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды