background image

5

Connecting to a Sound Module

Use the included stereo cable to make connections 

with the drum sound module.

 

5

Connect the L-shaped plug of the included cable to 

the PDX-8 or PDX-6. 

 

5

If you use a monaural cable, you won’t be able to 

employ rim shot and cross stick playing techniques.

*  To prevent malfunction and/or damage to speakers or other 

devices, always turn down the volume, and turn off the power 

on all devices before making any connections.

Trigger Type Settings for the Sound 

Module

Set the trigger type for the drum sound module to the 

pad you are using (

PDX-8

 or 

PDX-6

).

*  If you’re using the PDX-6 with the TD-30 or HPD-10, choose 

trigger type 

“PDX-8.”

*  If you’re using the PDX-8 or PDX-6 with the drum kit TD-1KV/

TD-1K, choose pad type 

“S2.”

For trigger parameter settings, see the drum sound 

module’s owner’s manual.

Playing Methods

Head Shots

Head

Rim Shots

A sound (rim sound) different than the head shot will 

be heard.

Rim

Player

Suitable position for rim 

shots

Cross Stick

Only strike the rim of the pad.
Depending on the instrument assigned to the rim, you 

can play rim shots and/or cross stick sounds.

Rim

Rim

*  To play the cross stick, be sure that you only strike the rim 

of the pad. Placing your hand on the head of the pad might 

prevent the cross stick sound from being played properly.

MEMO

For more on settings and instruments, see the drum sound 

module’s owner’s manual.

*  To play rim shots, strike 

the rim in the area 

shown in the diagram.

Содержание V-Drums V-PAD PDX-8









Отзывы: