Roland V-Drums TD-8, Руководство пользователя

Страница: 87 / 224

87
Chapter 2 Making the Settings for Drum Instruments
Chapter 2
3.
Press CURSOR [ ] to move the cursor to “TUNING.”
4.
Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
5.
Press [KIT].
The “DRUM KIT” screen appears.
MUFFLING:
V-KICK: OFF, TAPE1, TAPE2, BLANKET,
WEIGHT
V-SNARE: OFF, TAPE1, TAPE2,
DOUGHNUTS1, DOUGHNUTS2
V-TOM: OFF, TAPE1, TAPE2, FELT1, FELT2
OFF :
No muffling.
TAPE1 :
One strip of tape.
TAPE2 :
Multiple strips of tape.
BLANKET :
Muffled by placing a blanket inside the kick drum.
WEIGHT :
Blanket with a weight on top.
DOUGHNUTS1 :
Common ring type mute.
DOUGHNUTS2 :
Common ring type mute with stronger muffling of
overtones.
FELT1 :
Conventional felt type mute.
FELT2 :
Conventional felt type mute with more pressure on the
head.
Adjusting the Tension of the
Snare Strainer
The tone is adjusted by changing the degree of contact
between the lower head and the snare (resonating wires)
stretched across the lower head. Tightening the strainer
decreases the amount of time the snare continues to resonate,
resulting in shorter overall snare drum sound. You can select
from four tension settings: no contact between the snare and
head (OFF), loose (LOOSE), normal tension (MEDIUM), and
strong tension (TIGHT).
fig.03-008
Instrument group name that can be edited
V-SNARE
1.
First press [KIT], then [F1 (INST)], then [F2 (EDIT)], and
then [F2 (MUFFLE)].
[KIT] lights, and the “MUFFLE” screen appears.
2.
Strike a pad.
The settings screen for the struck pad appears.
3.
Press CURSOR or [ ] to move the cursor to
“TUNING.”
4.
Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
5.
Press [KIT].
The “DRUM KIT” screen appears.
STRAINER ADJ.: OFF, LOOSE, MEDIUM, TIGHT
OFF :
The sound with no snares.
LOOSE, MEDIUM, TIGHT :
The strainer tension becomes progressively stronger.
When selecting the snare for brush play, setting “STRAINER
ADJ.” to “OFF” may make the effect difficult to hear.