Roland V-Drums TD-8 Скачать руководство пользователя страница 136

Страница: 136 / 224

136

Chapter 7 Making Global Settings for the TD-8

Checking the Remaining
Amount of Memory

The remaining amount of memory and the number of User
patterns and songs is displayed.

fig.08-023

Press [SETUP], then [F3 (

MENU)].

[SETUP] lights, and a pop-up menu appears.

Press [INC/+] or [DEC/-], rotate the VALUE dial, or
press CURSOR [

] or [

] to move the cursor to

“UTIL.”

Press [F3] to confirm your choice.

Press [F3 (MEMORY)].

The “MEMORY” screen appears.

AVAILABLE: 0–100 (%)

PATTERN: 0–100/100 (Units)

Numerator: Number of User patterns used

Denominator: Total number of User patterns (100)

SONG: 0–50/50 (Units)

Numerator: Number of songs used

Denominator: Total number of songs (50)

The TD-8 was programmed with 50 songs when shipped
from the factory.
If the original settings are restored (Factory Reset; p.
172), “50/50” is displayed for “SONG.”

Switching the Setting Display
Automatically (NOTE CHASE)

Note Chase

This is a convenient function for use in editing tones. When
MIDI data corresponding to a pad is received, this function
automatically displays the settings screen for the instrument
used by that pad, and automatically moves the cursor.

Turning Note Chase On/Off

With the setting below, even with “NOTE CHASE” set to
“OFF,” the settings screen is displayed automatically when
the pad is struck.

fig.08-021

Press [SETUP], then [F2 (MIDI)], then [F1 (GLOVAL)],
and then [F1 (PAGE1)].

[SETUP] lights, and the “MIDI GLOVAL” screen
appears.

Press CURSOR [

] to move the cursor to “NOTE

CHASE.”

Press [INC/+] or [DEC/-] or rotate the VALUE dial to
switch the function on or off.

NOTE CHASE: OFF, ON

OFF

The display does not switch to the pad’s settings screen,
even when MIDI data corresponding to a pad is
received.

When MIDI data corresponding to a pad is received, the
display switches to the pad’s settings screen.

Содержание V-Drums TD-8

































































































































































































































Результаты поиска

Содержание V-Drums TD-8

Отзывы:

Похожие инструкции для V-Drums TD-8

Бренды по названию

Популярные бренды

Roland V-Drums TD-8, Руководство пользователя

Результаты поиска

Содержание V-Drums TD-8

Отзывы:

Похожие инструкции для V-Drums TD-8

Бренды по названию

Популярные бренды