manualshive.com logo in svg

Roland V-Drums TD-20X, Руководство пользователя

Поделиться
Скачать
Roland V-Drums TD-20X Скачать руководство пользователя страница 58

 

58

 

Chapter 4. Effect Settings

 

The TD-20X provides the following effects, and allows you to 

make detailed settings for each effect.

 

The TD-20X’s effects

 

•

 

COMP/EQ (Pad compressor/equalizer): 

 

These settings are made for each pad. They are called “pad 

compressor/equalizer” in order to distinguish them from the 

master compressor/equalizer.

•

 

AMBIENCE: 

 

These settings are made for each drum kit, and you can 

specify how deeply the effect will apply to each instrument.

•

 

MULTI EFFECTS: 

 

These settings are made for each drum kit, and you can 

specify how deeply the effect will apply to each instrument.

•

 

MASTER COMP/EQ: 

 

This is a compressor and equalizer that are applied to the 

final output of the sound. These settings are made for each 

drum kit.

 

See also the section  “Effects” (p. 36) in “An overview of 

the TD-20X.”

These switches allow you to turn the Pad Comp/EQ, 

ambience, multi effects, and master comp/EQs on/off within 

each drum kit.

 

1.

 

Press the [EFFECTS SWITCH] button.

 

The [EFFECTS SWITCH] button lights, and the “EFFECTS 

SWITCH” screen appears.

 

fig.04-001-fxsw.eps_70

 

2.

 

Press the [F1]–[F5] buttons to turn the following 

on/off.

 

*1: All pad compressors or pad equalizers are turned on/off 

simultaneously.

 

3.

 

Press the [EXIT] button to return to the “DRUM KIT” 

screen.

 

Effect on/off status appears in the “DRUM KIT” screen.

 

fig.04-002-kit-fxsw.eps_70

 

Turning Effects On/Off 
[EFFECTS SWITCH]

 

[F1]

 

Pad Compressor (*1)

 

[F2]

 

Pad Equalizer (*1)

 

[F3]

 

Ambience

 

[F4]

 

Multi-effects

 

[F5]

 

Master comp/EQ

ON

OFF

TD-20X_e.book 58 ページ ２００９年６月８日　月曜日　午後３時５０分

Содержание V-Drums TD-20X





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды