Roland V-Drums TD-20X Скачать руководство пользователя страница 48

Страница: 48 / 156

Chapter 2. Instrument Settings [INST]

Editing methods differ according to the type of instrument.

What is V-EDIT?

This is a function that allows you to simulate the tonal

changes produced by differences in the material, shape, and

size of an instrument. By choosing and tuning a favorite

head, or attaching muffling (a mute), you can create your

sound in an intuitive way just as when adjusting an acoustic

drum.

When V-EDIT can be used

V-EDIT is possible in the following instrument groups “KICK,”

“SNARE,” “TOM,” “HI-HAT,” “CRASH,” “SPLASH,” “CHINA,”

“STACKED CYMBAL,” or “RIDE.”

The following icon appears to indicate instruments which are

V-EDIT compatible.

fig.02-006-inst.eps_70

Other instruments only allow “Pitch,” “Decay Time,” and

“Dynamic Pitch Bend” adjustment (p. 51).

Press the [INST] button.

Press the [F2 (EDIT)] button.

The “INST EDIT” screen appears.

Select the pad that you want to edit.

Strike the desired pad, or use the TRIG SELECT buttons to

select it.

The edit screen for the selected pad will appear.

Use the [F1]–[F4] and [CURSOR (up/down)] buttons

to select the parameter.

Use the [-] [+] buttons or the [VALUE] dial to adjust

the setting.

When finished, press the [EXIT] button to return to

the “INST” screen.

You can return the settings of the currently selected

instrument to their standard values. In the “INST EDIT”

screen or “INST” screen, hold down the [SHIFT] button

and press the [F4] button; a confirmation message will

appear. Press the [F5 (EXECUTE)] button to return the

instrument settings to the standard values for that

instrument.

You can edit the head and rim instruments as a pair.

Each time you press the [F5 (H&R)] button, you will

alternate between editing the head and rim

simultaneously or separately. However if instruments

from different instrument groups are selected for the

head and the rim, they will be edited separately even if

you’ve turned on the [F5 (H&R)] button. This setting is

shown by the “HEAD” and “RIM” icons in the upper left

of the screen.

For some instruments, raising or lowering the value

beyond a certain point may not produce further change.

• KICK/SNARE/TOM: “Head Tuning”

• CRASH/SPLASH/CHINA/RIDE: “Sustain”

• Other Instruments: “Pitch” and “Decay Time”

Editing Drum Sounds [F2 (EDIT)]

Editing Acoustic Drum Sounds (V-EDIT)

Editing Other Instruments

Editing Procedure

TD-20X_e.book 48 ページ２００９年６月８日　月曜日　午後３時５０分

Содержание V-Drums TD-20X





























































































































































Результаты поиска

Содержание V-Drums TD-20X

Отзывы:

Бренды по названию

Популярные бренды

Roland V-Drums TD-20X, Руководство пользователя

Результаты поиска

Содержание V-Drums TD-20X

Отзывы:

Бренды по названию

Популярные бренды