Roland V-Drums TD-02 Скачать руководство пользователя страница 24

24

24

USING THE UNIT SAFELY

 WARNING

Concerning the Auto Off function

The power to this unit will be turned off 

automatically after a predetermined amount of 

time has passed since it was last used for playing 

music, or its buttons or controls were operated 

(Auto Off function). If you do not want the power to be 

turned off automatically, disengage the Auto Off function.

Use only the supplied AC adaptor and the correct voltage

Be sure to use only the AC adaptor supplied with 

the unit. Also, make sure the line voltage at the 

installation matches the input voltage specified 

on the AC adaptor’s body. Other AC adaptors 

may use a different polarity, or be designed for a different 

voltage, so their use could result in damage, malfunction, or 

electric shock.

 WARNING

Use only the supplied power cord

Use only the attached power cord. Also, the 

supplied power cord must not be used with any 

other device.

Keep small items out of the reach of children

To prevent accidental ingestion of the parts listed 

below, always keep them out of the reach of small 

children.

 

¹

Included Parts

Cymbal nut

 

¹

Removable Parts

Screws, Bolts, Bluetooth ADAPTOR jack’s cover, CR2 plug’s cap

IMPORTANT NOTES

About the Power Supply

 

¹

Place the AC adaptor so that the side with text is 

downward.

Repairs and Data

 

¹

Before sending the unit away for repairs, be sure to write 

down the needed information. Although we will do our 

utmost to preserve the data stored in your unit when 

we carry out repairs, in some cases, such as when the 

memory section is physically damaged, restoration of the 

stored content may be impossible. Roland assumes no 

liability concerning the restoration of any stored content 

that has been lost.

 

¹

Functional replacement parts for this unit (meaning the 

parts necessary to keep the unit working) are kept by 

Roland for six years after the unit goes out of production. 

This period of time is considered as the warranty period 

during which repairs can be accepted. Note that we 

may still be able to conduct repairs after this period 

depending on what has malfunctioned. Please consult 

with the dealer where you purchased the product, or 

with a Roland customer service center.

Additional Precautions

 

¹

Any data stored within the unit can be lost as the result 

of equipment failure, incorrect operation, etc. To protect 

yourself against the irretrievable loss of data, be sure to 

write down the needed information.

 

¹

Roland assumes no liability concerning the restoration of 

any stored content that has been lost.

 

¹

Never strike or apply strong pressure to the display.

 

¹

This instrument is designed to minimize the extraneous 

sounds produced when it’s played. However, since sound 

vibrations can be transmitted through floors and walls 

to a greater degree than expected, take care not to allow 

these sounds to become a nuisance others nearby.

 

¹

Do not use connection cables that contain a built-in 

resistor.

Intellectual Property Right

 

¹

The copyright of content in this product (the sound 

waveform data, style data, accompaniment patterns, 

phrase data, audio loops and image data) is reserved by 

Roland Corporation.

 

¹

Purchasers of this product are permitted to utilize said 

content (except song data such as Demo Songs) for the 

creating, performing, recording and distributing original 

musical works.

 

¹

Purchasers of this product are NOT permitted to extract 

said content in original or modified form, for the purpose 

of distributing recorded medium of said content or 

making them available on a computer network.

 

¹

The 

Bluetooth®

 word mark and logos are registered 

trademarks owned by Bluetooth SIG, Inc. and any use of 

such marks by Roland is under license.

 

¹

This product includes third party open source software. 

Copyright © 2009-2018 Arm Limited. All rights reserved. 

Licensed under the Apache License, Version 2.0 (the 

“License”); 

You may obtain a copy of the License at 

http://www.apache.org/licenses/LICENSE-2.0

 

¹

Roland, V-Drums are either registered trademarks or 

trademarks of Roland Corporation in the United States 

and/or other countries.

 

¹

Company names and product names appearing in this 

document are registered trademarks or trademarks of 

their respective owners.

Содержание V-Drums TD-02


























Отзывы: