manualshive.com logo in svg

Roland V-Drums TD-02, Руководство пользователя, Страница: 22 / 25

Поделиться
Скачать
Roland V-Drums TD-02 Скачать руководство пользователя страница 22

22

22

Troubleshooting

Problem

Items to Check

Action

Page

Troubles with sound

No sound/

insufficient volume

Is this unit correctly connected to the 

amplified speaker or headphones?

Connect amplified speakers or headphones to 

this unit’s OUTPUT/PHONES jack.

p. 6

If you’re connecting an amplified speaker, connect 

to the amplified speaker’s input jack.

–

Is the dedicated connection cable correctly 

connected to the TRIGGER INPUT connector 

located on the back of this unit?

Check the connections.

“Setup 

Guide”

Could an audio cable of headphones or 

amplified speaker be broken?

Replace the cable.

–

If sound is not output from the amplified 

speaker that’s connected, is sound 

outputted when you connect headphones?

If sound is being output, either the connection 

cable of the amplified speaker is broken, or there 

is a malfunction in the amplified speaker that’s 

connected. Check the connected device and 

cable.

–

Could the instrument’s volume be lowered?

Adjust the level appropriately.

–

Could the volume of the connected 

amplified speaker be lowered?
Could the volume be lowered on the 

mobile device that’s connected to the MIX 

IN jack or via Bluetooth?

A specific pad does 

not sound

Are the cables correctly connected to each 

pad and pedal?

Connect the appropriately labeled cable to each 

pad.

“Setup 

Guide”

Could the pad sensitivity be lowered?

Adjust the pad sensitivity (Sens).

p. 14

If you expanded the pads or replaced a pad 

with a different type of pad, is the pad type 

specified correctly?

Adjust the pad type.

No sound when you 

press the kick pedal

Is the cable labeled KIK connected to the 

kick pad?

Check the connections.

“Setup 

Guide”

No sound when 

you press the hi-hat 

pedal

Is the cable labeled HHC connected to the 

hi-hat pedal?

The sound of 

another pad is also 

heard when you 

strike the pad.

If multiple pads are attached to the same 

stand, the vibrations when you strike one 

pad can be transmitted to another pad, 

causing it to sound inadvertently. 

Note the following points, and make changes to 

the attached positions.

 

¹

Separate the pads so that they do not touch 

each other.

 

¹

Firmly tighten the knobs that fasten the pad 

to ensure that the pad is securely attached to 

the stand.

In some cases, sound from a monitor speaker 

might cause unintended triggering.

 

¹

Set up the pads at a distance from the speakers

 

¹

Angle the pads, placing them where they are 

less likely to be affected by the sound

 

¹

Increase the pad’s minimum sensitivity value 

(Threshold) (p. 14)

–

Two or more notes 

are sounded when 

you strike once

Is the pad fastened to the stand?

Fasten the pad firmly to the stand.
Also set the RetrigCancel parameter.

p. 18

Sounds do not play 

reliably

Are the snare and tom pad mesh heads (the 

snare of the TD-02KV) tensioned evenly?

Adjust the mesh head tension (the snare of the 

TD-02KV). Use a drum key to adjust the pad’s 

tuning bolts. Slightly higher tension is good for 

proper triggering.

“Setup 

Guide”

Содержание V-Drums TD-02


























Отзывы:

Нет отзывов