manualshive.com logo in svg

Roland V-Card, Руководство пользователя

Поделиться
Скачать
Roland V-Card Скачать руководство пользователя страница 11

 

11

 

Try Out the Sounds

 

To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and 
turn off the power on all devices before making any connections.

 

fig.03-01e(ConnectionImage)

 

1.

 

Before hooking anything up, make sure that the power on all of your gear is 
turned OFF.

 

2.

 

Connect the V-Synth XT to your amp/speaker system.

 

3.

 

Turn on the V-Synth XT’s Power switch.

 

4.

 

Turn on the power for any connected amplifiers or speakers.

 

5.

 

After the V-Synth XT has started up, press the [V-CARD] button and touch “D-
50” (VC-1) in the screen that appears. The VC-1 Startup screen appears.

 

*

The [V-CARD] button works only in the PATCH PLAY screen (V-Synth System) or the TOP screen (VC-1, VC-
2). Pressing the [V-CARD] button in other screens will have no effect.

*

When you turn on the power, the V-Card that was most recently started will start up.

 

6.

 

Wait for the VC-1 to start up. When it has started up normally, a screen like the following will appear. The 
display shows the selected Patch.

 

fig.03-02e(Card&LCD_default)

 

Turning On the Power

Monitor Speakers

Power amp

Mixer, etc.

Patch number

Key mode

Split point

The volume balance of the Upper & Lower Tone

Patch name

Tone name

vc1_for_XT_e2 11 ページ ２００５年３月２３日　水曜日　午後４時１３分

Содержание V-Card





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды