manualshive.com logo in svg

Roland V-Card VC-1, Руководство пользователя

Поделиться
Скачать
Roland V-Card VC-1 Скачать руководство пользователя страница 81

 

81

 

Settings for the Entire VC-1

 

SeparateCH (Receive Channel in Separate Mode)

 

When 

 

SEP

 

 (Separate Mode) or 

 

SEP-S

 

 (Separate Solo Mode) is selected, the Upper and Lower Tones can 

be controlled on different channels. The Lower Tone is controlled by the basic channel, and the Upper 
Tone is controlled by the receive channel set here. The V-Synth’s keyboard can control only the Upper 
Tone.

 

Value:

 

 1 – 16

 

*

The receive channel of each Patch can be set to a different number from the channel set here. (p. 32)

 

Local (Local Switch)

Local OFF

 

 separates the keyboard section from the synthesizer section in the VC-1. Therefore, 

Performance information is sent from the MIDI OUT connector, but the VC-1 does NOT make any sound. 
The Performance information fed into the MIDI IN connector, however, can control the VC-1’s 
synthesizer section.

 

Value:

 

 Off, On

 

Prog.C (Program Change Switch)

 

To receive or transmit Program Change messages, set this to 

 

On

 

.

Program Change messages are transmitted only when a Patch is selected by operating the V-Synth’s 
panel buttons, or when the Program Change number to be transmitted is altered also on the V-Synth’s 
panel. IN other words, Program Change messages are not transmitted by patch selection with the 
Program Change messages sent from an external MIDI device.

 

Value:

 

 Off, On

 

*

The Program Change Number of each Patch can be set to a different number from the number set here. (p. 32)

 

Exclusive (Exclusive Switch)

 

To receive or transmit Exclusive messages (Roland ID Number only), set this to 

 

On

 

, 

 

P-Dump

 

 or 

 

TxEdit

 

.

 

Value:

 

 Off, On, P-Dump, TxEdit

 

*

When set to 

 

P-Dump

 

, the Patch you select is transmitted to an external device. However, it cannot be transmitted 

by Patch Shift with the pedal switch, or by patch selection with the Program Change messages sent from an external 
device.

 

Bank.S (Bank Select Switch)

 

To receive or transmit Bank Select messages, set this to 

 

On

 

.

 

Value:

 

 Off, On

 

USB MIDI (USB MISI Switch)

 

If you want to exchange MIDI messages with a sequencer or UNI QUEST editor via USB connector, set 
this to 

 

On

 

. (

 

“Exchanging MIDI Messages with Your Computer”

 

 (p. 88))

 

Value:

 

 Off, On

 

Display

Function

On

 

Normally.

 

P-Dump

 

The patch data that you select is transmitted.

 

TxEDIT

 

The parameter data that you edited is transmitted.

vc1_e.book 81 ページ ２００４年４月２日　金曜日　午後３時２１分

Содержание V-Card VC-1





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды