manualshive.com logo in svg

Roland V-Card VC-1, Руководство пользователя

Поделиться
Скачать
Roland V-Card VC-1 Скачать руководство пользователя страница 21

 

21

 

Applying Effects to the Sound

 

You can assign a variety of patch factors (p. 133), tone parameters (p. 134), and other settings to the V-
Synth’s complement of controller sections, such as the Time Trip pad, the D Beam Controller, and the 
OSC1/OSC2 sections. This is referred to as the 

 

Control Setup

 

. With intuitive editing of sound sources 

with the knobs and sliders and greater performance expression with the 

 

Time Trip Pad

 

, you can use the 

D-50 in ways that go way beyond the original instrument.

 

1.

 

Access the 

 

PATCH TOP

 

 Screen.

 

fig.05-05e

 

2.

 

Touch 

 

<CTRL SET>

 

 in the lower left of the screen. The 

 

CTRL 

SETUP

 

 window appears.

 

3.

 

Touch the Time Trip pad, D-Beam Controller, or other controller 
to which you want to assign the parameter. The display of that 
controller section expands in the screen. The screen features at this 
time function as follows.

 

fig.05-05a(LCD_CtrlSetupList)

 

4.

 

When editing a parameter that requires you to specify a value, 
move the cursor to the value box of that parameter. Then modify 
the value by either turning the 

 

VALUE dial

 

 or pressing 

 

[INC/+]

 

 or 

 

[DEC/-]

 

. Parameters marked by 

 can be controlled by 

specific CTRL Setup. For details on each parameter, refer to the 
corresponding reference page.
The on-screen keys have the following functions.

 

5.

 

When you have finished CTRL Setup, touch 

 

<OK>

 

 to close the 

 

CTRL Setup

 

 window.

 

Assigning Parameters to the Controllers

 

Controllers

Parameters

 

TIME TRIP PAD, D BEAM, C2 Knob

MIDI Control Change Message

OSC1, OSC2,
COSM1, COSM2, TVA

Patch Factor (p. 133)
Tone Parameters (p. 134)
Partial Parameters (p. 135)

 

Keys

Functions

 

, 

Switches the set of controllers to be 
enlarged in the display.
Displays the parameters to be assigned 
as a list.

Returns to the CTRL SET screen.

Restores the assigned parameters to their 
original factory condition.

Value box; Selects the parameters assigned to 

the buttons and controllers.

Underline; Shows the button and controller functions.

Cursor

vc1_e.book 21 ページ ２００４年４月２日　金曜日　午後３時２１分

Содержание V-Card VC-1





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды