manualshive.com logo in svg

Roland V-Card VC-1, Руководство пользователя

Поделиться
Скачать
Roland V-Card VC-1 Скачать руководство пользователя страница 11

 

11

 

Panel Descriptions

 

TIME TRIP PAD

 

By touching the pad surface with your finger you can apply a variety of effects to the sound.

 

*

The Time Trip effect is not applied.

 

V-LINK

 

Not used with the VC-1.

 

ASSIGNABLE CONTROL

 

You can use them to modify the sound in realtime.

 

ARPEGGIO

 

You can use them to modify the sound in realtime.

 

*

The Arpeggiator is not available for use.

 

KEYBOARD

 

Here you can change the pitch range of the keyboard.

 

*

Changes you make the KEYBOARD settings are only temporary—they will be discarded as soon as the power is 
turned off. If you want you keep any changes you’ve made, you must save them in the VC-1. (

 

“How to Make the 

System Function Settings”

 

 (p. 78))

 

Display

Function

Indicator

 

This will light when you touch the Time Trip Pad.

 

[TIME TRIP]

 

This switches the Time Trip Pad on and off. The effect being controlled switches 
according to the buttons pressed. (p. 19)

 

[ASSIGNABLE]

[HOLD]

 

Switches hold on/off for the effect controlled by the Time Trip pad.

 

Display

Function

[C1]

 

Adjusts the Aftertouch Sens (p. 79).

 

[C2]

 

These can be assigned a variety of D-50 different functions, allowing you to change the tone 
in real time. (p. 22)

 

Display

Function

[TEMPO]

 

Adjusts the Chase time (p. 31) or the Portamento time (p. 28).

 

[ON/OFF]

 

Switches the Chase function on/off.

 

[HOLD]

 

Switches the Portamento function on/off.

 

Display

Function

[TRANSPOSE]

 

Modifies the pitch range of the keyboard in semitone steps (-12 – +12 semitones). 
Set the desired amount of transposition by holding down 

 

[TRANSPOSE]

 

 and 

pressing 

 

[+OCT]

 

 or 

 

[-OCT]

 

.

 

[-OCT], [+OCT]

 

Pressing 

 

[+OCT]

 

 or 

 

[-OCT]

 

 transposes the pitch of the keyboard in 1 octave units (-

3 – +3 octaves).

4

5

6

7

8

vc1_e.book 11 ページ ２００４年４月２日　金曜日　午後３時２１分

Содержание V-Card VC-1





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды