manualshive.com logo in svg

Roland V-Bass 04672434, Руководство пользователя, Страница: 44 / 184

Поделиться
Скачать
Roland V-Bass 04672434 Скачать руководство пользователя страница 44

 

44

Chapter 3 Global Device Settings (SYSTEM)

 

Setting upper and lower limits for the patches that can be switched 
allows you to select only the patches you need.

 

1.

 

Press [SYSTEM].

 

2.

 

Press PAGE [

] to display Page 3.

 

3.

 

Press [F1] (MISC).

 

4.

 

Press [F3] (FROM).

 

5.

 

Set the lower limit of the patch selection with 
the PATCH/VALUE dial and [F3] (FROM) or the 
F3 knob.

 

6.

 

Press [F4] (TO).

 

7.

 

Set the upper limit of the patch selection with 
the PATCH/VALUE dial and [F4] (TO) or the F4 
knob.

 

*

These settings are enabled in the following situations.

 

• When the PATCH/VALUE dial is turned
• When patches are switched with the control switches or 

other controls

• When SYSTEM CONTROL ASSIGN (p. 42) is used to 

assign PATCH SELECT INC or PATCH SELECT DEC to 
the FC-300’s control switches or expression pedal 
switches
These settings have no effect on other FC-300 operations 
or operations using an external MIDI device.

The text and icons in the LCD screen may be difficult to make out 
sometimes, such as immediately after the VB-99 is turned on or after 
extended use. The conditions at the place where you are using the 
VB-99 can also affect visibility. Should you run into this problem, try 
adjusting the contrast.

 

1.

 

Press [SYSTEM].

 

2.

 

Press PAGE [

] to display Page 1.

 

3.

 

Press [F1] (LCD).

 

4.

 

Turn the F1 knob to adjust the contrast.

 

Limiting the Patches That 
Can Be Switched (PATCH 
EXTENT)

 

Adjusting the Screen’s 
Contrast

VB-99_e.book 44 ページ ２００８年８月１８日　月曜日　午後１時１０分

Содержание V-Bass 04672434

























































































































































































Отзывы:

Нет отзывов