Roland V-Accordion FR-1, Быстрый старт

Страница: 16 / 120

FR-1 V-Accordion
16
(4) Press the lit register again to change
the speed of the Rotary effect (modula-
tion) that is added to the selected
organ sound.
■
Switching off the organ part
To return to a state where the Treble
accordion section sounds:
(5) Press the
[ORCHESTRA]
button again (it
goes dark).
Orchestral sounds for the Bass
section
The orchestral bass part can be used instead
of the Bass section (thus replacing the
accordion sound assigned to the bass rows).
(1) Press the
[ORCH¥BASS]
B
button (it
must light).
(2) Check whether the
[LEFT¥REGISTER]
C
button is dark. If it is not, press it.
(3) Use the Bass registers to select the
desired sound.
■
Switching off the Orchestra Bass
part
(4) Press the
[ORCH¥BASS]
button again to
return to normal Bass mode.
Orchestral sounds for the Chord
section
The orchestral chord part can replace the
accordion sound played by the chord rows
of the button keyboard.
(1) Press the
[ORCH¥CHORD]
D
button (it
lights).
(2) Check whether the
[LEFT¥REGISTER]
C
button lights. If it doesn’t, press it.
(3) Use the Bass registers to select the
desired sound.
While ORCH CHORD mode is active, you
can assign a different accordion register
to the bass rows by pressing
[LEFT¥REGISTER]
(it must be dark) and the
desired Bass register.
■
Switching off the ORCH CHORD part
(4) Press the
[ORCH¥CHORD]
button again
to return to normal Chord mode.
ORCH BASS sounds
1 Acoustic
2 Bowed
3* Fingered*
ORCH CHORD sounds
1 St. Strings
2 Chorus Organ
3* Steel Guitar*
FR-1_QuickStart.book Page 16 Friday, September 12, 2008 9:43 AM