Roland V-40HD Скачать руководство пользователя страница 49

Страница: 49 / 60

Menu Operations and Menu List

DSK menu

PGM Output

[OFF],ON

This turns final output of DSK on/off.

Transition

CUT, [MIX]

This selects the way of appearance/disappearance of foreground
image.

Type

Luminance 1 (White),
[Luminance 2 (Black)],
Chroma 1 (Blue),
Chroma 2 (Green)

This select the type (extraction color) of DSK.

Level

0 - 15

This sets transparency level when Luminance 1 or 2 is selected.

Y Level

0 - 255

This sets brightness level of the extraction color when Chroma 1 or
2 is selected.

Pb Level

0 - 255

This sets Pb level of the extraction color when Chroma 1 or 2 is
selected.

Pr Level

0 - 255

This sets Pr level of the extraction color when Chroma 1 or 2 is
selected.

Gain

0 - 9

This sets amout of edge blur when Chroma 1 or 2 is selected.

Source Channel

1 - [4]

This selects the channel of the picture to overlay for DSK
composition.

Audio menu

HDMI Output

Ch1. HDMI Audio,

Ch2. HDMI Audio, Ch3. HDMI Audio,

Ch4. HDMI Audio, [Audio In], Mixer

This selects the audio source to output.

Main Volume

Mute, -48dB - [0dB] - +6dB

This adjusts the volume of audio output.

Mixer

Pressing [ENTER] changes to a detailed setup screen for Mixer.

HDMI Audio Delay 0.0 - [3.0] - 12.0 (in 0.1-frame steps)

This sets the amount of delay for the HDMI audio input.

Audio In Delay

0.0 - [3.0] - 12.0 (in 0.1-frame steps)

This sets the amount of delay for the analog audio input.

Volume Control

[OFF], ON

When this is set to ON, you can use the [VALUE] dial to adjust the
volume (only when no menu is displayed).

Detailed setup for Mixer

Ch1. HDMI Audio
Volume

Mute, -48dB - [0dB] - +6dB

This adjusts the volume of HDMI channel 1.

Ch2. HDMI Audio
Volume

Mute, -48dB - [0dB] - +6dB

This adjusts the volume of HDMI channel 2.

Ch3. HDMI Audio
Volume

Mute, -48dB - [0dB] - +6dB

This adjusts the volume of HDMI channel 3.

Ch4. HDMI Audio
Volume

Mute, -48dB - [0dB] - +6dB

This adjusts the volume of HDMI channel 4.

Audio In Volume

Mute, -48dB - [0dB] - +6dB

This adjusts the volume of the analog audio input.

Содержание V-40HD





























































Результаты поиска

Содержание V-40HD

Отзывы:

Roland V-40HD, Руководство пользователя, Страница: 49 / 60

Результаты поиска

Содержание V-40HD

Отзывы: