Roland V-40HD Скачать руководство пользователя страница 46

Страница: 46 / 60

Menu Operations and Menu List

Menu List

Display and setting values shown enclosed in square brackets (“[ ]”) are factory-default values. You can return a setting value to its factory default by
holding down the [ENTER] button and pressing the [EXIT] button.

Input menu

Ch.1 - Ch.4

No Signal, [email protected] Hz - [email protected] Hz

This part displays the format of the current input signal.

[HDMI], RGB/Component, Composite, Shared Input

This part displays the currently selected input connector.

Press

[ENTER] to go to detailed setup of each channel.

Background

R16: G16: B16

Press [ENTER] to go to detailed setup of Background.

Detailed setup of Ch.1 - Ch.4

* Setting of Color Spance and Flicker Filter is not possible while you are selecting Composite as the source.

Color Space

[Auto], RGB(0-255), RGB(16-235), YCC(SD), YCC(HD)

This selects the color space setting as defined below.

•

Auto

The setting is automatically detected according to the input signal.

•

RGB (0-255)

This enables the full range of black to white for an RGB signal.

•

RGB (16-235)

This eliminates the low blacks and high whites from the input signal.

•

YCC (SD)

YCbCr signal where the chroma component (CbCr) is subsampled.

•

YCC (HD)

Pure YCbCr signal with no chroma subsampling.

Flicker Filter

[OFF]

This turns the flicker filter on/off. The flicker filter works to blur or
equalize the brightness differences between scanning lines.

Scaling

Zoom

10% - [100%] - 1000%

This sets the zoom ratio.

Type

[Full], Letterbox, Crop, Dot by Dot,
Manual

This selects the scaling type.

•

Full

The input image is displayed fully on the output screen. The

aspect ratio is changed to fit the screen..

•

Letterbox

The entirety of the input image is displayed on the output

screen horizontally while maintaining the aspect ratio. If

necessary, this means black bars will be across the top and

bottom.

•

Crop

The input image is displayed fully on the output screen

horizontally while maintaining the aspect ratio. If necessary, this

means black bars will be across the top and bottom..

•

Dot by Dot

No scaling is engaged.

•

Manual

The scaling is controlled based on size and position settings as

described below.

When [Manual] is selected, you can make the following settings:

Manual Size H

-2000 - [0] - +2000 This sets the horizontal size of the incoming source.

Manual Size V

-2000 - [0] - +2000 This sets the vertical size of the incoming source.

Position H

-1920 - [0] - +1920 This sets the horizontal position of the incoming source.

Position V

-1920 - [0] - +1920 This sets the vertical position of the incoming source.

* The setting-value range varies depending on the input/output format settings. The values shown above are minimum/maximum values.

Color Correction

Brightness

-64 - [0] - +63

This adjusts the brightness.

Contrast

-64 - [0] - +63

This adjusts the contrast.

Saturation

-64 - [0] - +63

This adjusts the saturation.

Red

-64 - [0] - +63

This adjusts the red level.

Green

-64 - [0] - +63

This adjusts the green level.

Blue

-64 - [0] - +63

This adjusts the blue level.

Содержание V-40HD





























































Результаты поиска

Содержание V-40HD

Отзывы:

Roland V-40HD, Руководство пользователя, Страница: 46 / 60

Результаты поиска

Содержание V-40HD

Отзывы: