background image

4

Top Panel

Panel Descriptions

Menu 

(p. 10)

[MENU] button

When this is on (lit), the menu appears on the display that’s 

connected to the OUTPUT 2 connector.
If you’re in a lower level, this button returns to the next higher level. If 

the highest menu level is shown, this button closes the menu.

[VALUE] knob

Selects a menu item, or edits the value of a setting.
Press this knob to confirm the menu item you selected or the value 

that you edited.

[OUTPUT FADE] knob 

(p. 23)

The final output video and audio fade in/out.
Rotating the knob counterclockwise fades to black, and rotating 

the knob clockwise fades to white.
The indicators located at the left and right of the [OUTPUT FADE] 

knob show the status.

Blinking red

Fading in/out

Lit red

Fade-out completed

Unlit

Normal output

AUDIO MIXER

[GAIN 1] [GAIN 2] knobs

Adjusts the input gain (sensitivity) of AUDIO IN 1 or AUDIO IN 2 

(p. 32).

+48V indicators 

(AUDIO IN 1, 2)

This is lit when phantom power is on.

[SETUP] button

Accesses the AUDIO INPUT menu. 
Long-press this button to turn the stereo link function on/off 

(p. 32). When this is on (lit), AUDIO IN 1 and 2 are linked, and 

operate as a stereo channel.

[AUDIO IN 1] [AUDIO IN 2] [LINE IN] knobs

Adjust the volume of the AUDIO IN 1, AUDIO IN 2, or LINE IN 

(p. 33).

SIG/PEAK indicators 

(AUDIO IN 1, 2/LINE IN)

These are lit green or yellow when audio input is detected. If the 

input is excessive, the indicator is lit red (p. 32).

SIG/PEAK indicator 

(MAIN)

Indicates the overall volume level.

Lit red

Volume is excessive.

Lit yellow

Volume is appropriate.

Lit green

Volume is insufficient.

[MAIN] knob

Adjusts the overall volume (p. 33).

[LIMITER] button

Turns the limiter (clipping prevention) on/off. When turned on, 

the [LIMITER] button is lit green.

USER 

(p. 29, 30)

[DSK PVW] button

When this is on (lit), it makes the DSK compositing results the 

preview output.

[DSK ON] button

Turns on/off DSK composition.

*  The settings described above are the factory defaults. You can 

also assign different functions to each button (p. 41). If a different 
function is assigned, the USER indicator is lit.

Содержание V-1HD+





































































Отзывы: