Roland TM-6 PRO, Список данных

Страница: 8 / 37

8
MENU
PAD-FX
PAD EQ
This is a three-band equalizer that is provided for the head and for the rim of each drum trigger.
Parameter Value Explanation
[F3] button OFF, EQ ON Turns pad equalizer on/off.
LOW Freq
20Hz–1kHz Center frequency of the low range
LOW Gain -15–+15dB Amount of boost/cut for the low range
MID Q 0.5–8.0
Width of the frequency range
A higher Mid Q narrows the affected area.
MID Freq 20Hz–16kHz Center frequency of the mid range
MID Gain -15–+15dB Amount of boost/cut for the mid range
HIGH Freq 1kHz–16kHz Center frequency of the high range
HIGH Gain
-15–+15dB Amount of boost/cut for the high range
MEMO
If you press the [F1] (H&R) button to turn it “ON,” you can simultaneously make settings for the head area and rim area.
PAD TRANSIENT
This allows you to emphasize or de-emphasize the attack portion or release portion of each drum trigger.
Parameter Value Explanation
[F3] button OFF, TRANSIENT ON Turns the transient effect on/off.
Sens U LOW, LOW, MID, HIGH
Adjusts the sensitivity of the transient effect.
If the sensitivity is raised, the transient effect applies more easily even for repeated strikes.
For sounds with a long release, such as cymbals, this might cause unintended response.
In this case, you can decrease the unintended response by lowering the sensitivity.
Attack -50–+50
Allows you to emphasize or de-emphasize the attack portion.
MEMO
You can also use the sound modify knob to adjust this.
Release
-50–+50
Allows you to emphasize or de-emphasize the release portion.
MEMO
You can also use the sound modify knob to adjust this.
Gain -12.0–+6.0dB Volume after transient adjustment
* Pad transient settings are made for individual drum triggers. They cannot be made for individual strike locations (such as the head or rim).
* For some settings of the “Pad Effect to Direct” and “Master Direct Sw” parameters in OUTPUT SETUP (p. 17), the pad transient effect is not applied to the sound that is output
from the DIRECT OUT jacks (MASTER OUT jacks).