manualshive.com logo in svg

Roland TM-6 PRO, Список данных

Поделиться
Скачать
Roland TM-6 PRO Скачать руководство пользователя страница 15

15

MENU

GLOBAL SETUP

Parameter

Value

Explanation

BASIC tab

MIDI Tx/Rx Sw

OFF, ON

Turns the transmitting and receiving MIDI messages on/off.

MIDI Channel

1–16Ch

Transmit and receive channel.

Program Change Tx

OFF, ON

Turns program change transmission on/off

Program Change Rx

OFF, ON

Turns program change reception on/off

Soft Thru USB MIDI In

OFF, ON

Specifies whether performance data received from the TM-6 PRO’s USB COMPUTER port is 

transmitted to the MIDI OUT connector (ON) or are not transmitted (OFF).

Local Control

OFF, ON

Turns on/off the connection between the performance data from the drum triggers and the 

TM-6 PRO’s sound generator section
Normally you’ll leave this “ON.” If this is “OFF,” the performance data from the drum triggers is not 

connected to the TM-6 PRO’s sound generator section.

Device ID

17–32

Device ID setting
The setting described here is necessary only when you wish to transmit separate data to two or 

more TM-6 PRO units at the same time. Do not change this setting in any other case.

Transmit Edit Data

OFF, ON

Specifies whether changes in the TM-6 PRO’s settings are transmitted as system exclusive messages 

(ON) or not transmitted (OFF).

Receive Exclusive

OFF, ON

Specifies whether system exclusive messages are received (ON) or not received (OFF).

CTRL tab

HH Pedal CC

OFF, 1, 2, 4, 11, 16, 17, 18, 19

Control change used for transmitting/receiving the depth to which the hi-hat pedal pressed

HH Note# Border

0–127

This number specifies the pedal position at which to switch from open hi-hat to closed hi-hat.
*  There’s no need to change this setting if you’re performed and recording only with the TM-6 PRO 

and the drum triggers.

Cymbal Choke Shot

OFF, ON

Switches support for the performance technique of striking a pad while choking it.
If this is “ON,” striking a pad while choking it immediately mutes the sound after it begins. If this is 

“OFF,” the sound is not muted immediately even if you strike a pad while choking it.

Sync Mode

Specifies the synchronization signal according to which the TM-6 PRO operates.

INTERNAL

Choose this setting if you’re using the TM-6 PRO by itself without synchronizing it to another 

device, or if you want another device to operate in synchronization with the TM-6 PRO.

EXTERNAL

The TM-6 PRO operates as a slave device. Choose this setting if you want the TM-6 PRO to operate 

according to synchronization messages that it receives from another device.

Sync Out

OFF, ON

Specifies whether MIDI synchronization messages are transmitted to another device (ON) or not 

transmitted (OFF).

PRGCHG tab

MIDI Program Change

1–127

You can freely specify the correspondence between kits and the program change numbers that are 

transmitted and received.

Using the Local Control setting

If you’re using a DAW with the performance data from the drum triggers and TM-6 PRO’s sound generator 

section, you should turn the Local Control “OFF.” Here’s why.

We need to connect these sections in the following order: the performance data from the drum triggers

0 

a DAW

0

the TM-6 PRO’s sound generator section.

Since the performance data from the drum triggers and TM-6 PRO’s sound generator section are connected 

internally, such a connection order would normally be impossible. However, if the Local Control is “OFF,” the 

performance data from the drum triggers and TM-6 PRO’s sound generator section will be independent, 

allowing you to use a DAW as shown here in the illustration.

Specifying the HH Note# Border

The note number transmitted when you strike the hi-hat will change depending on the amount of pressure on the hi-hat pedal.
At the factory default value (90), the closed hi-hat note number will be transmitted only if the hi-hat drum trigger is played with the pedal completely depressed. If you want this 

note number to be transmitted when the pedal is slightly raised, set this to a value such as “90.”
*  In some cases, changing the hi-hat note number border setting might cause a song to play back differently than when it was recorded.

DAW

Sound generator 

section

Local Control: OFF

Drum trigger

TM-6 PRO

Содержание TM-6 PRO






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды