Roland SP-404MK2 Скачать руководство пользователя страница 55

Страница: 55 / 136

Editing a Sample (SAMPLE EDIT)

Hold down the [COPY] button and press the [EXIT] button.

The COPY BANK PAD screen appears.

Press the bank [A/F]–[E/J] buttons to select the bank to copy (source).

Turn the [VALUE] knob clockwise to move the cursor.

Press the bank [A/F]–[E/J] buttons to select where to copy the bank (destination).

Press the [VALUE] knob.

All the samples in the bank are copied to the specified bank.

Performing this operation overwrites (erases) the sample in the copy destination pad.

Protecting a Sample (PROTECT)

This function prevents the samples and patterns assigned to a pad from being overwritten by being copied or edited, or
accidentally deleted.

Protection is set on a bank by bank basis. Protection is set for both samples and patterns.

Press the bank [A/F]–[E/J] buttons to select the banks to protect.

To select banks F–J, press the bank [A/F]–[E/J] buttons twice to make them blink.

Hold down the [SHIFT] button and press the [COPY] button.

A protect confirmation message appears.
To cancel the protect operation, press the [EXIT] button.

Use the [VALUE] knob to select “OK”, and press the [VALUE] knob.

To cancel protection, do the same operation again.

Deleting the Sample from a Pad

This is how to delete the sample assigned to a pad.

Press the [DEL] button.

The SELECT PAD screen appears.

Press the pad containing the sample you want to delete.

If you decide to cancel deleting, press the [EXIT] button.

Press the [VALUE] knob or [DEL] button.

The pad’s sample is deleted.

You can’t restore a pad’s sample after it has been deleted.

Содержание SP-404MK2









































































































































Результаты поиска

Содержание SP-404MK2

Отзывы:

Похожие инструкции для SP-404MK2

Бренды по названию

Популярные бренды

Roland SP-404MK2, Справочное руководство

Результаты поиска

Содержание SP-404MK2

Отзывы:

Похожие инструкции для SP-404MK2

Бренды по названию

Популярные бренды