manualshive.com logo in svg

Roland SF-200, Руководство по установке


Поделиться
Скачать
background image

H 

Press [ ] or [ ] to select the unit of measurement you want for temperature.

TEMP. UNIT
   C       F

。

。

I 

Press [ENTER] to confirm your entry.

Step 5: Ink Filling

Firstly, clean the print heads with cleaning liquid when installing ink cartridges for the first time after shipment 
from the factory. After cleaning, fill the machine with the ink of each color.
The on-screen messages indicate which ink cartridges to insert and remove and when to insert and remove them.
Follow the instructions given in P. 33 "2. Clean the print heads using the SOL INK cleaning cartridges." and P. 36 
"3. Insert the ink cartridge for each color.".

Items Used in this Procedure

•  Two SOL INK cleaning cartridges
•  The ink cartridges to be used

IMPORTANT

•  Be sure to use new SOL INK cleaning cartridges and ink cartridges.
•  Never, under any circumstances, use anything other than the specified type of ink or cleaning liquid.

Setting Up the Machine

31

2.Installation

Содержание SF-200



















































Отзывы:

Нет отзывов

Похожие инструкции для SF-200

Бренды по названию

Популярные бренды

Загрузить еще бренды