Roland S-4000M, Руководство пользователя

Страница: 7 / 28

7
Check the included items
S-4000M itself
fig.S4000M-itself.eps
Power cord
fig.AC-cord.eps
REAC connector cover (five)
fig.connector-cover.eps
Rubber foot (four)
fig.rubber-foot.eps
*Attach the included rubber feet as needed. Refer “Dimensions“(p. 23)
for locations to attach.
Ferrite core (five)
figferritecore.eps
Fastening screws (four)
fig.foru-screws.eps
Owner’s Manual (this document)
fig.owners-manual.eps
The following items are included. Please make sure that all items are present. If anything is missing, please contact your dealer.
What’s REAC?
REAC (Roland Ethernet Audio Communication) is a proprietary audio-signal transmission protocol from Roland that is
based on Ethernet technology. It provides up to 40 channels of 24-bit, 96-kHz transmission of uncompressed audio
signals. REAC devices are connected using Cat 5e (Enhanced Category 5) Ethernet cable. The S-4000M is designed to
be a merge unit for REAC devices. You can use it to manage connected REAC slave devices, making the S-4000M and
all the connected REAC devices function as a single REAC slave device.
What’s REAC EMBEDDED POWER?
This is technology that supplies connected equipment with power while simultaneously transmitting REAC signals
over the same cable. This means the equipment receiving power does not need to be connected to a power cable or a
battery.
MMP (Moore Microprocessor Portfolio) refers to a patent portfolio concerned with microprocessor architecture that
was developed by Technology Properties Limited (TPL). Roland has licensed this technology from the TPL Group.
* Neutrik and EtherCon are registered trademarks of Neutrik, Inc.
* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
S-4000M_e.book 7 ページ ２０１４年１１月２６日 水曜日 午後４時４分