Roland S-4000M, Руководство пользователя

Страница: 16 / 28

16
Connecting Peripheral Devices
Connect an M-400 or other V-Mixer.
* Depending on the version of the V-Mixer, the digital snake device connected to the S-4000M might be recognized as an S-4000S (configured
with modules for 40 inputs).
When the S-4000M detects the connected V-Mixer and REAC communication starts, the [A] of [LINK] indicators in REAC STATUS flashes. If this
does not flash, try detaching and reconnecting the cables and switching the power on and off.
Connecting in the MERGE Mode
When the connection is made in the MERGE mode, multiple digital snake devices connected to the S-4000M are seen by the V-
Mixer as a single digital snake device. In this case, the S-0808 units are powered by the S-4000M, so no external batteries are
required.
* In the figure shown below, A and B and 1 through 4 refer to names and numbers of the REAC ports.
fig.M400-connection.eps
Connecting in the THRU Mode
As shown in the figure below, you can connect the S-0808 units and V-Mixer via the S-4000M when it is set to the THRU mode. In
this case, the S-0808 units are powered by the S-4000M, so no external batteries are required.
* In the figure shown below, A and B and 1 through 4 refer to names and numbers of the REAC ports.
fig.connect-M380.eps
Connecting an V-Mixer to REAC Port A
Connecting the S-4000M and V-Mixer Directly
STAGE
FOH
M-400
A
or
B
1 2 3 4 A
STAGE
FOH
M-380
A
B
1
2
3
4
S-4000M_e.book 16 ページ ２０１４年１１月２６日 水曜日 午後４時４分