Roland RSS AR-200R, Руководство пользователя

Страница: 26 / 72

26
Recording and Playing MIDI Data
(MIDI Phrase)
What is a MIDI Phrase?
You can use the AR-200R for recording and playback of
MIDI data. MIDI data recorded with the AR-200R are called
“MIDI phrases.”
MIDI phrases and audio phrases are treated identically as
phrases.
You can take MIDI data recorded with a MIDI sequencer and
record this to the AR-200R as MIDI phrases, using them as
“MIDI data playback sent to sound generating modules for
broadcast within buildings.”
MIDI data is saved by the AR-200R as Format 0 SMFs
(Standard MIDI Files). The MIDI Time Base is fixed at 192.
* The AR-200R can only playback Format 0 SMF data.
* Audio phrases and MIDI phrases cannot be recorded or played
back simultaneously.
* The capacity of cards used for MIDI phrases is affected not
only by recording time, but by the size of the MIDI data in the
MIDI phrases themselves. Please be aware that when you
record MIDI phrases, the possible recording time for a single
card varies according to the size of the MIDI data.
Control of the unit by using MIDI signals is described in
another chapter.
Please refer to “Controlling the AR-200R with MIDI Signals
(MIDI Control)”
(P.42).
Connecting External Devices
fig.mid-01
This automatically changes to MIDI THRU during recording
and in recording standby.
“Important Notes on Making Connections and Switching
the Power On and Off” (P.9)
Procedure for Recording MIDI
Phrases
Make the correct connections, then turn on the power switch.
“Important Notes on Making Connections and Switching
the Power On and Off” (P.9)
1.
Insert a formatted card into one of the slots.
2.
Press the [ ] or [ ] button to select the number of the
phrase to be recorded.
* The non-recording phrase number in display is flashed.
* If you are re-recording over a previously recorded phrase, you
should delete the phrase (p. 25).
* You cannot change the phrase number after recording, so be
sure to select the phrase number you want to record.
3.
Hold down the STOP button and press the PLAY button
to go into recording standby.
The PLAY indicator is flashed while the recording standby
mode.
fig.mid-02
4.
Hold down the [ ] button for at least 2 seconds to
switch to MIDI mode. The MIDI/CLIP indicator is lit.
* Recording will begin when a System Real time message
“Start” (FAH) is received from the connected MIDI device.
5.
After you press the PLAY button, recording begins when
MIDI signals are input from the connected MIDI device.
While recording is in progress, the PLAY indicator lights,
and a dot flashes in the display.
fig.mid-03
* When the card becomes full, recording will stop automatically.
MIDI OUT
Powerd Speaker
(For Monitor)
MIDI Sequencer
MIDI Sound Source
MIDI IN
MIDI OUT
MIDI IN
blink
lit
AR-200R_e.book 26 ページ ２０１０年７月１日 木曜日 午前１１時２４分