Roland RP302, Руководство пользователя

Страница: 12 / 20

Various Settings (Function Mode)
Display Value Explanation
F08
1
,
2
Changing the Tuning Method (Stretch Tuning)
This setting changes the type of stretch tuning, a tuning method that is used specifically for pianos, in which the high notes
are tuned slightly sharper and the low notes are tuned slightly flatter.
Normally, you should use the “1” setting (standard tuning curve).
F0g
F10
1
(Sostenuto, Soft),
2
(Start/Stop),
Changing How the Pedals Work
Here you can assign the functions of the center pedal (
F0g
) and left pedal (
F10
).
1
0
Sostenuto pedal (
F0g
), soft pedal (
F10
)
2
0
Same function as the [
s
(Start/Stop)] button
F11
Off
,
On
Preventing Doubled Notes When Connected to a Sequencer
(Local Control)
If a software synthesizer is connected to USB MIDI, turn this item
“OFF.”
Since most software synthesizer have their Thru function turned
on, notes you play on the keyboard may be sounded in duplicate,
or get dropped. To prevent this, you can enable the “Local Off”
setting so that the keyboard and internal sound generator will be
disconnected.
If you choose “OFF,” the keyboard is disconnected from the internal
sound generator,and playing the keyboard will not produce
sound.
F12
U.01
–
U.10
(USER 01–10)
N.01
–
N.gg
(USB 01–99)
Copying a Song (Copy Song)
A song that you recorded on this unit can be copied to a USB flash drive.
The copy-source song number is displayed; use the [-] [+] buttons to select the desired number, and press the [
s
] button
to confirm it.
The copy-destination s ong number is displayed; use the [-] [+] buttons to select the desired number, and press the [
s
]
button to confirm it.
F13
OFF
,
10
,
30
,
240
[min.]
Making the Power Automatically Turn Off After a Time (Auto Off )
This specifies the auto-off setting.
The remaining time blinks before the power turns off. When there is less than one minute remaining, the countdown will be
in seconds.
*
This setting is saved automatically when you change it
F14
None
Saving the Settings (Memory Backup)
The settings of RP302 will return to their default state when you turn off the power. However, you can save
the settings so they will remain unchanged even after the power has been turned off, then on again.
The display indicates “
Svr
”; press the [
y
] (cancel) button or the [
s
] (execute) button to cancel or execute.
Software
Synthesizer
Local Control
Sound Generator
USB MIDI
In
USB MIDI
Out
Computer
page
11
12