manualshive.com logo in svg

Roland RG-7, Руководство пользователя

Поделиться
Скачать
Roland RG-7 Скачать руководство пользователя страница 44

 

42

Chapter 1. Playing Back Songs

 

Copying Songs

 

You can copy performances recorded with the RG-7, songs saved on CD-ROMs, 

songs on USB memory connected to the RG-7’s Ext Memory port, and other songs to 

the RG-7’s “Favorites.”

Copying songs to the “Favorites” enables you to access these songs easily by 

pressing the [Song] button to select the “Favorites” as the genre.

 

■

 

Copying Songs Saved on CDs and USB Memory 
to the “Favorites”

 

1.

 

Connect the USB memory device to the Ext Memory port or place the CD-

ROM containing the song or songs you want to copy in the CD drive.

 

2.

 

Press the [Function] (Exit) button so the indicator is lit.

 

3.

 

Press the [Song] (Select -) button or [

] () button to display 

the FILE screen.

 

fig.

 

4.

 

Press the [Song] (Select -) button or [

] () button so “COPY” is 

flashing.

 

fig.

 

5

 

Press the [Moving Key] (Enter) button.

 

6

 

Press the [Song] (Select -) button or [

] () button so that the 

“COPY From” setting is flashing.

 

fig.

NOTE

You cannot copy songs on 

commercially available audio 

CDs or Player Piano CDs to the 

“Favorites.”

RG-7_e.book 42 ページ ２００７年１２月２１日　金曜日　午前９時２４分

Содержание RG-7





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды