Roland RG-7 Скачать руководство пользователя страница 35

Страница: 35 / 124

Chapter 1. Playing Back Songs

■

How to Use the Remote Control

When using the remote control, aim the remote control at the infrared receiver,
keeping in mind the range of operation (below).

Precautions Concerning Use of the Remote Control

• The remote control is able to transmit only one operation at a time.

• The remote control may not operate even within the range of operation if there

is an obstacle between it and the main unit.

• Using the remote control near other equipment that uses remote control systems

may result in operational errors.

• The life of the battery depends on the amount and conditions of use. If the

operational range of the remote control decreases, change the batteries.

• If you will not be using the remote control for a long period of time, remove the

batteries.

• The responsiveness of the remote control may suffer if the remote control is

within the glare of any spotlights or exposed to other strong light.

Front View

Top View

Remote Control

Infrared Receiver

Range of operation

Distance:

4 m (approximately 13 feet)

Angle:

40 degrees to the left and right
of the receiver.

RG-7_e.book 33 ページ２００７年１２月２１日　金曜日　午前９時２４分

Содержание RG-7





























































































































Результаты поиска

Содержание RG-7

Отзывы:

Бренды по названию

Популярные бренды

Roland RG-7, Руководство пользователя

Результаты поиска

Содержание RG-7

Отзывы:

Бренды по названию

Популярные бренды