Roland RD-300NX, Руководство пользователя

Страница: 58 / 96

58
Detailed Settings for Each Function
The MENU button can be used to make a variety of settings.
Setting Parameters
To setting screen
Leaving setting screen
Change the value
(The number of EDIT screen pages may
vary according to the menu selected .)
Select an item
Switch screens
Getting the [MENU]
button light
Extinguishing the
[MENU] button
EDIT Screen
EDIT MENU Screen
Select a menu
MEMO
The following settings will be stored as common settings for the
entire RD-300NX when you press the [LAYER EDIT] (WRITE) button
in an edit screen.
0. System
4. Compressor
7. V-LINK
However, following settings are not saved.
•
V-LINK On or Off
Parameters That Can Be Set
Menu Parameter Page
0 . System
Master Tune p. 60
Master Volume p. 60
Pedal Mode p. 60
Tone Remain p. 60
S1/S2 Mode p. 60
LIVE SET Control Channel p. 61
USB Driver p. 61
USB Memory Mode p. 61
Damper Polarity p. 61
FC1 Polarity p. 61
FC2 Polarity p. 61
Part Mode p. 62
Temperament p. 62
Temperament Key p. 62
Rx. GM/GM2 System ON p. 62
Rx. GS Reset p. 62
1 . Key Touch
Key Touch p. 63
Key Touch Offset p. 63
Velocity p. 63
Velocity Delay Sensitivity p. 64
Velocity Keyfollow Sensitivity p. 64
Key Off Position p. 64
2 . Control
FC1 Pedal Assign p. 65
FC2 Pedal Assign p. 65
S1 Assign p. 65
S2 Assign p. 65
3 . Effects
Reverb Type p. 66
Reverb Parameters p. 66
Chorus Type p. 66
Chorus Parameters p. 66
4 . Compressor
Type p. 67
Split Frequency L p. 67
Split Frequency H p. 67
Depth p. 67
Level p. 67
Attack Time p. 67
Release Time p. 67
Threshold p. 67
Ratio p. 67