Manual
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
Maintenance
B0059001 / Rev. 2.3
130
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
10.5 SND40StoreV2
SND40StoreV2 is an easy-to-handle aid for saving / restoring program and system files.
Requirements:
•
Hardware version of the SND40, based on processor module NetDCU10
•
USB-Stick (attached and located inside the unit)
X
Y
Position of
spare fuse
Position of
USB stick
Fig. 76: Position of USB stick and spare fuse inside of unit
SND40_USB-Stick_und_Sicherung.JPG
The program replaces the previous backup program of the SND40 device "SND40_10Store.exe"
and its English version "SND40_10StoreENU.exe". The programs mentioned above are among
others no longer able to backup and restore advanced system configuration and programs with
numbers higher than 31.
10.5.1 Definitions
Term
Explanation
SND40 program directory
Folder on the SND40 device containing all the program,
utility, configuration and data files associated with the SND40
application.
Backup root directory
Folder containing one or more backup directories.
Backup directory
This folder contains the backup files of a specific backup
operation.