Roland MV-8000 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 32

Roland MV-8000 Скачать руководство пользователя страница 5

5

Preparations and concepts

«

Preparations and concepts

Howling could be produced depending on the location of microphones
relative to speakers. This can be remedied by:

• Changing the orientation of the microphone(s).

• Relocating microphone(s) at a greater distance from speakers.

• Lowering volume levels.

Connecting the power

Use the included power cable to connect the MV-8000 to an AC outlet.

To prevent electrical shock, use the included power cable and connect the
ground correctly.

The included power cable has a three-pin plug with a ground pin that can
prevent electrical shock and damage to your equipment.

* Unsuitable places for connection

• Water pipes (may result in shock or electrocution)

• Gas pipes (may result in fire or explosion)

• Telephone-line ground or lightning rod (may be dangerous in the event of

lightning)

Depending on the
circumstances of a
particular setup, you may
experience a discomforting
sensation, or perceive that
the surface feels gritty to
the touch when you touch
this device, microphones
connected to it, or the metal
portions of other objects,
such as guitars. This is due
to an infinitesimal electrical
charge, which is absolutely
harmless. However, if you
are concerned about this,
connect the ground
terminal (see figure) with
an external ground. When
the unit is grounded, a
slight hum may occur,
depending on the
particulars of your
installation. If you are
unsure of the connection
method, contact the nearest
Roland Service Center, or
an authorized Roland
distributor, as listed on the
“Information” page.

QuickStart_e.book 5 ページ２００５年４月２８日　木曜日　午後９時３５分

«
...
3
4
5
6
7
...
»

Содержание MV-8000

































Отзывы:

Нет отзывов