Roland MV-8000 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 32

Roland MV-8000 Скачать руководство пользователя страница 4

4

Preparations and concepts

Preparing your equipment and making

connections

In order to prevent malfunctions and speaker damage, you must turn down the
volume of all your equipment and turn off the power before making connections.

• Connect the rear panel ground connector if you are using a turntable. This can

prevent hum noise.

• When connection cables with resistors are used, the volume level of equipment

connected to the inputs (ANALOG INPUT) may be low. If this happens, use
connection cables that do not contain resistors, such as those from the Roland PCS
series.

• If you're not using the PHONO jacks, insert the included short plug. This will

prevent noise from being introduced via the PHONO jacks.

VGA OUT/MOUSE (OPTION)

Computer

e.g., DV-7PR

Device with R-BUS connector
e.g., VS-2400CD

device

Power cable

Edirol
UM-1, etc.

MD Recorder, etc.

Speakers

Power amp

Turntable

Headphones

Foot Switch

Microphone

Ground Connector

Sound module

MV8-OP1 (sold separatery)

You cannot use the PHONO and MIC/LINE analog inputs
at the same time.
If you make connections to MIC/LINE,
the PHONO input will be disabled.

In addition to the equipment
shown above, the following
items can also be convenient.

• Audio CD or CD-ROM

discs containing materials
for sampling

• CD-R or floppy discs for

backup or data exchange

QuickStart_e.book 4 ページ２００５年４月２８日　木曜日　午後９時３５分

«
...
2
3
4
5
6
...
»

Содержание MV-8000

































Отзывы:

Нет отзывов